Associated Builders and Contractors of Indiana/Kentucky

Heating and Air Conditioning Installer Servicer

Fort Wayne
Certificate
Heating and Air Conditioning Installer Servicer
ABC is an NCCER Accredited Training Sponsor running U.S. Department of Labor registered apprenticeships.
One 3-hour evening class a week and 3 hours of online study, alongside on-the-job learning hours.
$610 a semester for employees of ABC members, $840 for non-members, plus lab, book and first-year fees.
4 years: 2,000 hours of on-the-job learning and at least 160 classroom hours each year.
A one-time $100 new student enrollment fee applies.
Tuition is invoiced to the apprentice or the employer; eligible veterans can receive a VA stipend.

Heating and Air Conditioning Installer Servicer is a Certificate program offered by Associated Builders and Contractors of Indiana/Kentucky in Fort Wayne, IN. The program takes 4 years to complete, with tuition of $610 per semester.

Program Overview

ABC of Indiana/Kentucky (ABC) is a provider of formal construction apprenticeship programs through the U.S. Department of Labor, Office of Apprenticeship. ABC is also an NCCER Accredited Training Sponsor and, as such, awards globally recognized craft credentials and certificates upon completion of each level of study. ABC is a federally certified training program by Veteran Affairs.

ABC offers a wide variety of training options from formal apprenticeship programs to specific task training modules of study.

What sets this Program apart

By the time apprentices graduate they will be one of the most highly certified journeyman in their field.

Vincennes University partnership. Vincennes University and ABC have been partners for nearly 20 years. This partnership brings a tuition free associate degree opportunity for all ABC Indiana apprentices. During the apprenticeship, each student must successfully complete and pass ABC Apprenticeship courses, accumulate On-The-Job Learning hours, and finish Vincennes University Core Curriculum Classes. Students may also transfer in credits from other institutions.

Admission Requirements and Process

Applicants must meet the following minimum requirements to qualify for enrollment in the program:

On-the-job hours earned must be verified by the company the student is working for.

General Requirements

  • Minimum age
    Be at least 16 years of age
  • Proof of education
    Provide an office copy of a their high school diploma, G.E.D., or proof of track of completion; *High school graduation or equivalent must be complete by the start of the second year in order for the apprentice to continue in the program.
  • Identification
    Provide copy of Drivers License or Government Issued Identification
  • Eligible to work in the U.S.
    Must be legally eligible to work in United States
  • Physical ability
    Be physically capable of performing the essential functions of the apprenticeship program
  • Signed application
    Submit a completed and signed official application

Application Process

  1. 1
    Choose New or Returning
    Start here if this will be your first year attending an ABC training site and you do not already have a Flashpoint account registered through ABC Apprenticeship.
  2. 2
    Select your training site
    Select the training site you’d like to attend and review its registration guide before applying. Sites: Indianapolis, Daleville, Elkhart, Fort Wayne, Kentucky/Southern Indiana, Lafayette, Greenwood/Columbus.
  3. 3
    Prepare your documents
    Fill out Part A of the DOL Apprentice Agreement (ETA Form 671) electronically — do not sign it yet. Review the ABC Apprentice Handbook and sign the Handbook Authorization Release / Program Acknowledgment form. Have a clear image of your driver’s license or government-issued ID, and your NCCER number (create or find it at NCCER if you do not have one).
  4. 4
    Complete the registration form
    Open the registration link for your training site, read the instructions and complete all required information, uploading the Apprentice Agreement, the signed acknowledgment and your ID.
  5. 5
    Verify your email within 1 hour
    After submitting the form, you will receive an email asking you to verify your email address. You must complete this step within 1 hour, then watch for the email confirming your registration was submitted.
  6. 6
    Follow-up from your training site
    The apprenticeship coordinator for your training site is notified automatically and will continue the next steps. You will then receive an email to set up your Flashpoint account; once your password is set, your new apprentice registration is complete.
  7. 7
    Register for classes and pay
    Class registration is a separate follow-on step. Payment must be received prior to the start of each semester; self-pay students and non-member companies must pay in full two weeks before the first day of class.

Program Schedule

Classes begin in late August and are held once a week for three hours in the evening with three hours of online study.

Term. 4 years — 8,000 hours of on-the-job learning (2,000 each training year) and a minimum of 160 hours of academic study each training year.

Training sites. This trade is listed on the 2026–2027 registration forms for the Elkhart and Fort Wayne training sites. Registration for 2026–2027 is currently open at Elkhart and Fort Wayne; other sites show “This application is not currently available.”

Wage progression. ABC’s DOL Apprentice Agreement (ETA 671) sets a hybrid, 8,000-hour term with a 1,000-hour probationary period and this progression, as a percentage of the journeyworker wage rate:

On-the-job hoursPercent of journeyworker rate
0–1,000 hours50%
1,000–2,00055%
2,000–3,00060%
3,000–4,00070%
4,000–5,00075%
5,000–6,00080%
6,000–7,00085%
7,000–8,00090%
8,000 hours (journeyworker)100%

Curriculum

ABC teaches the NCCER curriculum. The modules below are NCCER’s published curriculum for this craft (HVACR, REVISED 2022, 6th Edition); ABC does not publish its own module list.

ModuleTitleRecommended Hours
Level 1, 6th Edition
03101Introduction to HVACR5
03102Trade Mathematics10
03106Basic Electricity15
03108Introduction to Heating15
03107Introduction to Cooling30
03109Air Distribution Systems15
03103Basic Copper and Plastic Piping Practices12.5
03104Soldering and Brazing10
03105Basic Carbon Steel Piping Practices10
Level 2, 6th Edition
03316Customer Relations7.5
03215Basic Maintenance20
03313Fasteners and Hardware10
03206Alternating Current12.5
03302Compressors12.5
03303Metering Devices12.5
03301Refrigerants and Oils15
03205Leak Detection, Evacuation, Recovery, and Charging30
03211Heat Pumps20
03403Indoor Air Quality12.5
03204Air Quality Equipment5
03202Chimneys, Vents, and Flues5
Level 3, 6th Edition
03317Control Circuit Troubleshooting20
03318Motor Testing and Troubleshooting12.5
03210Troubleshooting Cooling20
03311Troubleshooting Heat Pumps12.5
03209Troubleshooting Gas Heating12.5
03310Troubleshooting Oil Heating15
03312Troubleshooting Accessories10
03213Sheet Metal Duct Systems10
03203Introduction to Hydronic Systems15
03306Steam Systems10
03214Fiberglass and Fabric Duct Systems7.5
03304Retail Refrigeration Systems15
03315Zoning, Ductless, and Variable Refrigerant Flow Systems15
Level 4, 6th Edition
03308Water Treatment10
03404Energy Conservation Equipment7.5
03405Building Management Systems12.5
03402System Air Balancing and Psychrometrics15
03406System Startup and Shutdown15
03401Construction Drawings and Specifications12.5
03407Comfort System Design and Planning22.5
03408Commercial/Industrial Refrigeration Systems20
03409Alternative and Specialized Heating and Cooling Systems7.5
03305Commercial Hydronic Systems12.5
03201Commercial Airside Systems12.5
46100Introduction to Leadership22.5

Cost of Attendance and Financial Aid Information

Per Semester Tuition
≈ $610

Students are billed each semester. Total tuition cost will vary per-level, per-trade, per-member vs. non-member.

ChargeSemester 1Semester 2
Tuition — ABC member$610$610
Tuition — non-member$840$840
Lab supplies fee$100$100
Textbook$200
Vincennes University fee$55
New student enrollment fee (first year)$100

Who pays. The registration form asks who will be invoiced: the apprentice directly, or the company/employer. Training companies responsible for student tuition will be invoiced. Self-pay students and non-member companies must provide payment in full two weeks prior to the first day of class.

Testing out. There is a $200 fee for each level of written testing.

Veterans. ABC is a federally certified training program by Veteran Affairs. Apprentices using VA benefits receive a monthly stipend; the reimbursement goes directly to the apprentice and not to ABC.

Career Outcomes

Credentials. ABC is an NCCER Accredited Training Sponsor and awards globally recognized craft credentials and certificates upon completion of each level of study. Completers receive a U.S. Department of Labor certificate of completion.

Required safety certifications. Students are required to hold these certifications by the end of their apprenticeship: OSHA 10 Hour Safety Training; First Aid/CPR; Lockout/Tagout; Fall Protection; Lift Certifications (Fork, Boom, Scissor).

Associate degree. During the apprenticeship, each student must successfully complete and pass ABC Apprenticeship courses, accumulate On-The-Job Learning hours, and finish Vincennes University Core Curriculum Classes to earn the associate degree. ABC describes it as tuition free for ABC Indiana apprentices; Vincennes University’s 2026–27 catalog lists $25.00 per credit hour for major program requirements.

What to expect as an Associated Builders and Contractors of Indiana/Kentucky student

On-the-job hours. On-the-job hours earned must be verified by the company the student is working for: apprentices enter their hours in Flashpoint and the company confirms them.

Graduation. Indiana gathers graduates from all locations across the state for a central commencement ceremony. Graduates in attendance will be recognized as they walk across the stage and receive their ABC portfolio, V.U. Diploma if earned, DOL certificate, along with a gift from ABC and sponsors of the event!

Videos

School Information

Associated Builders and Contractors of Indiana/Kentucky
abcindianakentucky.org
Follow us:

Campus Location

Fort Wayne
4201 Parnell Avenue
Fort Wayne, IN 46805

Why Accreditation Is Important

ABC of Indiana/Kentucky is a provider of formal construction apprenticeship programs through the U.S. Department of Labor, Office of Apprenticeship (program IN001820001), and an NCCER Accredited Training Sponsor.

  • Registered with the U.S. Department of Labor
  • Nationally recognized NCCER credentials
  • Earn while you learn on the job
  • Recognized by employers nationwide

Accreditations

NCCER Accredited Training Sponsor
Ready to get started?
Apply to Heating and Air Conditioning Installer Servicer at Fort Wayne.
Heating and Air Conditioning Installer Servicer