Advanced Manufacturing Technology
Associate Degree
Automotive Technology is a Diploma program offered by Central Pennsylvania Institute of Science and Technology in Pleasant Gap, PA. The program takes 9 months to complete, with a total tuition of $9,484.
The Automotive Technology Program at CPI provides students with the knowledge and hands-on training necessary to inspect, maintain, and repair automobiles and light trucks powered by gasoline, electricity, and alternative fuels such as ethanol. As modern vehicles rely on advanced electronic systems and complex computer diagnostics, students will develop the skills needed to work with both mechanical and high-tech automotive components.
This program combines classroom instruction with practical experience, allowing students to master the use of computerized shop equipment, electronic diagnostic tools, and digital reference materials alongside traditional hand tools. Emphasizing industry-relevant training, students will gain expertise in troubleshooting, repair techniques, and preventive maintenance to meet the demands of today's automotive industry.
To enhance career readiness, students will have the opportunity to earn industry-recognized certifications, including PA State Inspection, Emissions, Mobile Air Conditioning Society (MACS), Safety and Pollution Prevention (SP2), and Automotive Service Excellence (ASE). These credentials validate students' skills and prepare them for employment in dealerships, independent repair shops, fleet maintenance, and other automotive service industries.
To enhance career readiness, students will have the opportunity to earn industry-recognized certifications, including PA State Inspection, Emissions, Mobile Air Conditioning Society (MACS), Safety and Pollution Prevention (SP2), and Automotive Service Excellence (ASE).
All applicants for admission in diploma programs must possess a high school diploma or GED, complete an online application and submit the required application fee. Program admission requirements: Application Fee, Application, Enrollment Agreement, High School Diploma, Transcript or GED, Criminal Record Check, and Child Abuse Clearance.
CPI's 2026-2027 cost table lists a start of September 2, 2026 (ending June 7, 2027); no later start date is published. Please check with CPI Admissions and review the Program Enrollment Agreement for start dates.
Cost of attendance (2026-2027). CPI's July 1, 2026 to June 30, 2027 cost table lists tuition $9,484, books $205, supplies & materials $1,580, other fees $240, application fee $50, for a maximum total cost of $11,559. CPI states these are maximum potential program costs and your program costs may be lower.
Financial aid. Applicants may apply online for financial aid at www.fafsa.ed.gov or call CPI's financial aid office at 814.359.2793 (Ext. 262) for more information. Filling out the FAFSA will automatically begin the Title IV fund application. Certain programs may qualify for Financial Aid from one or more of the following: PELL Grants, Federal Direct Loans, PA-TIP, WATCH, VA, OVR, TAA and WIOA. CPI's FAFSA school code is 015445. CPI's Net Price Calculator is at https://cpi.edu/wp-content/uploads/2025/01/netprice1025.html.
Veterans. CPI accepts the Post-9/11 GI Bill®, Montgomery GI Bill®-Active Duty (MGIB-AD), Dependents' Educational Assistance, and Chapters 30, 31 (Vocational Rehabilitation), 33, 35, 1606 and 1607.
Payment. A student's tuition account must be satisfied and complete prior to the student's completion of their training program. If the student is being sponsored by an agency or funding source, CPI requires verification of sponsorship/funding prior to enrollment in the program.
| Subject # | Name |
|---|---|
| AUT-101 | Introduction to Automotive Technology |
| AUT-102 | Automotive Safety & Tools |
| AUT-103 | Automotive Electrical Systems |
| AUT-201 | Engine Performance & Diagnostics |
| AUT-202 | Braking Systems |
| AUT-203 | Steering & Suspension Systems |
| AUT-204 | Automatic Transmissions & Transaxles |
| AUT-205 | HVAC Systems in Automotive Technology |
| AUT-210 | Automotive Capstone & Certification Prep |
| Totals |
Career outcomes. Industry-recognized certifications prepare students for employment in dealerships, independent repair shops, fleet maintenance, and other automotive service industries.
Student achievement rates. CPI's posted student achievement rates report a 100% graduation rate and a 75% graduate employment rate for Automotive (population base 5, time frame 03/20 to 02/21) (CPI Student Achievement Rates, https://cpi.edu/wp-content/uploads/2022/08/Student_Achievement_Rates21.pdf).
Attendance. CPI requires students to attend all scheduled classes, and instructors keep a weekly record of attendance to comply with the institution's Standards of Academic Progress. Attendance may be factored into the final grade for a course or program (refer to the course syllabus). If a student's tardiness or absences become excessive, the instructor will notify the student in writing; continued tardiness or absences may result in disciplinary action, including removal from the program. Students are responsible for notifying the instructor when they will be tardy or absent from class.
Excused absences and make-up work. Excused absences are approved by the instructor/coordinator or the Office of Post-Secondary Education and may include military leave, bereavement, extended illness, jury duty, and participation in a professional or school function. It is the student's responsibility to inquire about make-up work when a class is missed; make-up work guidelines and policies are program specific and provided by the instructor.
Class size. The maximum number of students in a typical classroom or laboratory/shop setting is 20, and the instructor-to-student ratio maintained is 1 teacher per maximum 20 students. If a class or lab has a lower or higher maximum, it is specified in the course catalog and/or the Student Program Enrollment Application.
Start dates and closings. Dates and times for courses are listed on the individual Student Program Enrollment Applications; start dates and times are subject to change, and enrolled students are notified by the Post-Secondary Education Office if changes occur. On occasion CPI may cancel or delay classes due to inclement weather, and it uses the School Reach System and local media for notifications.
CPI is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and licensed by the Pennsylvania State Board of Private Licensed Schools (Pennsylvania Department of Education).
Automotive Technology is 900 clock hours (335 lecture and 565 lab) over nine courses.
| Subject # | Name | Lecture | Lab | External | Total |
|---|---|---|---|---|---|
| AUT-101 | Introduction to Automotive Technology | 25 | 25 | 0 | 50 |
| AUT-102 | Automotive Safety & Tools | 25 | 75 | 0 | 100 |
| AUT-103 | Automotive Electrical Systems | 50 | 100 | 0 | 150 |
| AUT-201 | Engine Performance & Diagnostics | 100 | 100 | 0 | 200 |
| AUT-202 | Braking Systems | 35 | 65 | 0 | 100 |
| AUT-203 | Steering & Suspension Systems | 25 | 75 | 0 | 100 |
| AUT-204 | Automatic Transmissions & Transaxles | 25 | 25 | 0 | 50 |
| AUT-205 | HVAC Systems in Automotive Technology | 25 | 25 | 0 | 50 |
| AUT-210 | Automotive Capstone & Certification Prep | 25 | 75 | 0 | 100 |
| Totals | 335 | 565 | 0 | 900 |
Central Pennsylvania Institute of Science and Technology in Pleasant Gap, PA also offers these 75 programs at 540 North Harrison Road, Pleasant Gap, PA 16823.
Associate Degree
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Diploma
Diploma
Certificate
Certificate
Continuing Education
Diploma
Continuing Education
Diploma
Diploma
Continuing Education
Diploma
Diploma
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Certificate
Certificate
Continuing Education
Associate Degree
Diploma
Associate Degree
Diploma
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Diploma
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Diploma
Diploma
Continuing Education
Certificate
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Diploma
Diploma
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Diploma
Diploma
Continuing Education
Diploma
Continuing Education