Delta Technical College

HVAC/R Technician

Horn Lake
Horn Lake, MS
Diploma · On Campus
HVAC/R Technician
Accredited by ACCSC; the Horn Lake HVAC/R program is also nationally accredited by HVAC Excellence.
On campus at Horn Lake, MS, Monday–Thursday with morning, afternoon and evening (5:15–10:30 p.m.) classes.
Tuition is $16,581; total cost is $18,297 including registration, books, lab fee, tools, device and testing fee.
35 weeks (9 months): 735 clock hours plus 182 outside hours, for 28 semester credits.
A $100 registration fee is charged and is included in the program’s total cost; payment secures your seat in a class.
Federal Pell Grants and Federal Direct Loans are available to those who qualify (FAFSA school code 033683).

HVAC/R Technician is a Diploma program offered by Delta Technical College in Horn Lake, MS. The program takes 35 weeks (9 months); 735 clock hours; 28 semester credits to complete, with a total tuition of $16,581.

Program Overview

The DTC HVAC/R program consists of seven 5-week modules. Each module contains basic subject content for training in the installation, repair and maintenance for the heating, ventilating, air conditioning and refrigeration industry and installation and trade skills, with an extensive “hands-on” experience as well as theory, equipment components and operation. The program welcomes any person with or without previous electrical, mechanical or construction training or experience.

HVAC/R techs provide a variety of services including repair, maintenance, and installation for heating, ventilation, air conditioning, and refrigeration equipment. The student is required to take and pass the EPA Section 608 Core, Type I, and Type II certification exams.

Admission Requirements and Process

DTC requires all applicants to the school to provide proof of a high school diploma, recognized equivalency certificate, or documentation of home school completion. All applicants complete a personal interview with an authorized representative of the school and a Health Affidavit/Screening, and present a valid driver’s license, state issued ID, or United States passport.

Admission procedures. A visit to the school; a personal interview with an authorized representative of the school; and payment of the registration fee, if applicable, by the first day of class unless otherwise authorized (payment of the registration fee secures a student’s seat in a class). All other tuition and fees must be paid on the first day of class unless otherwise authorized.

Trial enrollment period. Students who enroll will be offered an opportunity to attend for up to three days without incurring a financial obligation, excluding the registration fee (and the D.O.T. Physical and D.O.T. Drug Screen for CDL students). Any student who withdraws within three class days of the official start date will not be considered to have started school, and their tuition obligation and cost of course materials will be waived.

General Requirements

  • Proof of education
    Proof of a high school diploma, recognized equivalency certificate, or documentation of home school completion.
  • Personal interview
    A personal interview with an authorized representative of the school.
  • Health Affidavit/Screening
    Completed Health Affidavit/Screening.
  • Identification
    Valid driver’s license, state issued ID, or United States passport is required.
  • Minimum age
    Must be 17 to enroll.

Application Process

  1. 1
    Connect with an Admissions Representative
    You are always welcome to walk-in to a DTC campus to meet an Admissions Representative during business hours – no appointment required. If you would prefer to schedule an appointment, the Admissions Team is available by phone at 866-733-6652 and will help schedule your interview and campus tour.
  2. 2
    Take your campus tour
    You will learn about DTC’s programs, explore the inside of the labs and classrooms, and see the support structure in place to help students succeed.
  3. 3
    Meet with the Financial Aid Team
    DTC’s Financial Aid Representatives help prospective students understand the options to help pay for school, including Federal Financial Aid, scholarships and grants, and can assist in filling out the FAFSA. Delta Technical College’s FAFSA school code is 033683.
    FAFSA Code for Horn Lake: 033683
    Complete FAFSA Application

Program Schedule

Monday through Thursday, 8:00 a.m. – 1:15 p.m., 1:00 p.m. – 6:15 p.m., or 5:15 p.m. – 10:30 p.m. The maximum number of students in a typical classroom is 20 and 15 in lab.

Start DateGraduation Date
July 13, 2026March 25, 2027
August 17, 2026April 29, 2027
September 21, 2026June 3, 2027
October 26, 2026July 22, 2027
November 30, 2026August 26, 2027
January 19, 2027September 30, 2027
February 22, 2027November 4, 2027
March 30, 2027December 9, 2027
May 3, 2027January 27, 2028
June 7, 2027March 2, 2028

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $16,581
Total Program Cost
≈ $18,297
FAFSA Code

Program cost (Delta Technical College Student Catalog 2026): Tuition $16,581; Registration Fee $100; Books $230; Lab Fee $550; Tools $470; Portable Electronic Device $340; Testing Fee $26; Total Cost $18,297.

The majority of Delta Technical College’s students receive some form of financial aid. Since DTC is not a traditional college, there is no deadline to apply for federal funding, grants or other kinds of financial assistance. Prospective students can apply for financial aid at any point prior to their selected program’s official start date.

When filling out your FAFSA (Free Application for Federal Student Aid), be sure to use the appropriate income tax year. The school code for Delta Technical College is 033683. DTC is approved for the Federal Pell Grant, William D. Ford Federal Direct Loan Programs, Federal Direct Subsidized and Unsubsidized Stafford Loan (Student) and Federal Direct PLUS Loan (Parents of Dependent Students). Federal grants and loans are available to those who qualify.

Curriculum

35 Weeks / 735 Clock Hours / 182 Additional Outside Clock Hours / 28 Semester Credits, in seven 5-week modules. Each module is 50 clock hours lecture, 55 clock hours supervised lab and 26 additional outside clock hours (4 credits).

ModuleDescription
Basic ElectricityElectricity applied to comfort systems, testing and identifying electrical components, sizing electrical conductors and over current protection according to NEC; testing and installing controls, motors, and fans; diagnosing and troubleshooting in the HVAC/R lab.
Air ConditioningTheory of heat transfer, refrigeration cycle, identifying and diagnosing refrigeration system components, sequence of operation; refrigerant recovery, recycle, evacuation and charging procedures.
Heat Pumps and Electric HeatHeat pump applications (Air to Air, Geothermal, Multi-Split, Mini-Split, and Variable Refrigerant), components and theory of operation; electric heating furnaces; installing and troubleshooting these systems.
Installation and Trade SkillsInstallation process and tool usage for air conditioners and mini-split systems, heat pumps, hydronic heat systems, and gas heat; measurements, fasteners, and basic building construction.
Gas HeatCombustion theory and process, heating efficiencies, ignition systems, furnace configurations, gas properties, gas valves, regulators, sequence of operation and safety; maintenance, repair, and troubleshooting.
Indoor Air QualityFiltering and media, electronic air cleaners, dehumidification, humidification and UV light air purification; residential load calculation; duct design, zone control and duct work.
Employment and Certification ReadinessEmployment preparation, professionalism development and certification exam review (always taken last).

The student is required to take and pass the EPA Section 608 Core, Type I, and Type II certification exams (the retake fee for the EPA is $25). Students at the Horn Lake, MS campus are required to sit for HVAC Excellence exams in electrical, air conditioning, and a form of heat prior to graduation, and the cost is covered in their tuition. Optional HVAC Excellence student employment ready assessment certifications (basic electricity, basic air conditioning, electric heat, heat pumps, gas heat, light commercial air conditioning, and light commercial refrigeration) are available at an additional cost.

Tool kit includes: soft tool bag, ratchet wrench and hex key inserts, mini tube cutter, magnetic long drivers, wire stripper, telescopic mirror, channel lock pliers, 10” adjustable wrench, needle nose plier, 6 in 1 screwdriver, left and right aviation snips, Fieldpiece multimeter, R22/410A manifold with 60” hoses, and mini level. Students are not allowed to use or provide their own gear or tools.

Career Outcomes

The program objective is to provide each student with the basic knowledge and skills as a quality entry level employee in the HVAC/R industries. The program will prepare you for entry-level careers in a number of roles, including but not limited to:

  • Equipment and duct installer
  • Apartment maintenance technician
  • Sales representative
  • Refrigeration mechanic
  • Field service representative
  • Commercial maintenance
  • Self-employment

Other industry related fields include duct cleaners, service technicians, sheet metal, electrical, facilities maintenance, management, marketing, estimating and inspections. Successful completion of the HVAC/R course and EPA Section 608 Core, Type I, and Type II certification exams entitles the student to a diploma in HVAC/R. Employment by some employers may require a clean driving record, a criminal background check, a drug screen, relocation, climbing ladders, working in attics and crawlspaces, moving heavy equipment, working in harsh environments and being available for 24 hour service calls.

The HVAC/R program at the Horn Lake, MS campus is nationally accredited by HVAC Excellence.

Career placement. The respective Program Director can provide assistance to currently enrolled students and graduates, including job placement assistance and guidance as they seek employment. DTC cannot and does not guarantee a student will obtain employment or will obtain a minimum starting wage.

Published outcomes (HVAC/R, 2024–2025, Mississippi Commission on Proprietary School and College Registration, License No. C-624; reported for DTC’s Mississippi campuses):

  • Completed within 150% of the normal time for completion: 75%
  • Graduates employed in their field of study or a related field within six months: 71%
  • Students achieving mastery of stated goals of the program of study: 75%

Tennessee Higher Education Commission disclosure (Horn Lake campus only, July 2024–June 2025): withdrawal rate 13.1%, completion rate 75%, in-field placement rate 8.3%.

Campus Location

Horn Lake
6530 Interstate Boulevard
Horn Lake, MS 38637

Why Accreditation Is Important

DTC is accredited by the Accrediting Commission of Career Schools & Colleges (ACCSC). DTC is approved by the U.S. Department of Education to participate in federally-funded financial aid programs.

Delta Technical College is licensed by the Mississippi Commission on Proprietary Schools and College Registration, Certificate No. C-624. Licensure indicates only that minimum standards have been met; it is not an endorsement or guarantee of quality. Delta Technical College is authorized for operation as a postsecondary educational institution by the Tennessee Higher Education Commission.

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

Accrediting Commission of Career Schools and Colleges (ACCSC)

Other Programs at Horn Lake

Delta Technical College in Horn Lake, MS also offers these 10 programs at 6530 Interstate Boulevard, Horn Lake, MS 38637.

Delta Technical College

CDL Training Course

Certificate Of Completion

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
180 clock hours; 16 days
App fee
None
Tuition
$4,076 for the Program
Delta Technical College

Cosmetology Instructor Training

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
1,000 clock hours
App fee
None
Tuition
$11,107 for the Program
Delta Technical College

Cosmetology School

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
1,500 clock hours
App fee
None
Tuition
$20,490 for the Program
Delta Technical College

Dental Assisting

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
35 weeks; 765 clock hours incl. 225 externship hours; 26.5 semester credits
App fee
None
Tuition
$17,200 for the Program
Delta Technical College

Industrial, Commercial and Residential Electrician

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
30 weeks (7 months); 720 clock hours; 30 semester credits
App fee
None
Tuition
$17,082 for the Program
Delta Technical College

Medical Assisting

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
35 weeks; 765 clock hours incl. 225 externship hours; 26.5 semester credits
App fee
None
Tuition
$17,173 for the Program
Delta Technical College

Phlebotomy

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
5 weeks; 100 clock hours; 4 semester credits
App fee
None
Tuition
$2,281 for the Program
Delta Technical College

Professional Truck Driving

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
750 clock hours; 20 weeks (day) or 24 weeks (evening); 24 semester credits
App fee
None
Tuition
$11,763 for the Program
Delta Technical College

Welding

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
30 weeks (7 months); 720 clock hours; 27 semester credits
App fee
None
Tuition
$16,024 for the Program
Delta Technical College

Welding & Pipefitting

Diploma

On-CampusFinancial Aid
Horn Lake
Horn Lake, MS
Next start
Rolling enrollment
Duration
40 weeks (10 months); 960 clock hours; 36 semester credits
App fee
None
Tuition
$20,281 for the Program
Ready to get started?
Request information about HVAC/R Technician at Horn Lake.
HVAC/R Technician