Diver Medic Technician
Certificate
Kirby Morgan Hat Technician is a Certificate program offered by Divers Institute of Technology in Seattle, WA. The program takes 3 days, 24 hours to complete, with a total tuition of $1,000.
As a diver, your life depends on your helmet. In the Kirby Morgan Hat Technician course, you’ll learn how to fix and maintain this critical piece of equipment. The industry standard and requirement is that all dive helmets need to be torn down, inspected, and rebuilt once a year.
The Helmet and Band Mask course is designed and intended to teach commercial divers, tenders, and technicians how to perform routine maintenance, annual inspections, and repair of Kirby Morgan Helmets and Band Masks and instructs personnel in the KMDSI/Dive Lab recommended configuration and use of KMDSI Helmets and Band Masks.
The first part of this course is in the classroom, learning about legal do’s and don’ts and going through the technician manual. The second part of the course you spend down in the shop doing hands on work. You’ll tear down a hat completely to the shell, inspect everything, replace all the soft goods, put it back together, and adjust it.
Dive hats are essential equipment you’ll be working with for the rest of your career so the knowledge you’ll gain from the Hat Technician Course is practical training you’ll be able to use throughout your diving career.
Hat Classes have a maximum of 8 students per class (per Kirby Morgan requirements to ensure quality of education.)
With this training, you will be trained to perform repairs on your own equipment and the company’s equipment where you work, as well as equipment owned by other diving employees of the company you work for. The training brings the technician into the specialized KMDSI/Dive Lab program, allowing for advice and assistance in all equipment problems and issues. All technicians receive KMDSI technical updates and bulletins, as well as newsletters.
Once the training has been completed, the Technician is authorized and encouraged to teach the KMDSI Operator/User Course using the curriculum and guidelines set-up by KMDSI and Dive Lab, Inc. per company policy.
The course is intended for commercial divers, tenders, and technicians, and was set up to enable large and small diving companies, as well as freelance divers to inspect, maintain, annually overhaul and perform most repairs using the manufacturers’ recommended procedures and guidelines. DIT students can register for the Kirby Morgan Hat Technician Course once they’ve completed their fourth month of training. Hat Classes have a maximum of 8 students per class (per Kirby Morgan requirements to ensure quality of education). If the class you select fills up, you can be placed on a waiting list; registrations are processed on a first-come first-serve basis.
Three-day (24-hour) course; classes held monthly (maximum of 8 students per class). Class length depends on the number of students and material being covered. Upcoming course dates:
Cost. $1,000 for the 24-hour course (Helmets & Band Masks). You can pay for the class on DIT’s website when you register or the balance is due 7 days prior to the class start date. Refunds will be issued only if the student cancels their registration no less than 7 days prior to the start of class.
Financial aid. This course is approved for VA funding for qualifying students. Contact a DIT Financial Aid Administrator for more information.
| Name |
|---|
| Introduction |
| Use of Kirby Morgan Operational Check Lists A2.1 thru A2.6 |
| Daily pre/post dive procedures |
| Monthly helmet inspection procedure |
| Supervisor pre-dive inspections |
| Supervisor in water checks |
| Calculation of proper supply pressure and volume requirements |
| Face Port Insert inspection and testing |
| Cleaning and sanitizing |
| Helmet and Band Mask annual overhaul procedures |
| EGS interface procedures and configurations |
| How to teach the KMDSI Helmet/Band Mask Operator/User Course |
| How to properly log maintenance and repairs |
| Totals |
Upon completion, each student will receive a certification valid for three (3) years for the individuals to maintain their own equipment and/or the company’s or affiliate companies’ equipment for which the individual works, as well as equipment belonging to other diving employees of the company as dictated by company policy. Once the training has been completed, the Technician is authorized and encouraged to teach the KMDSI Operator/User Course using the curriculum and guidelines set-up by KMDSI and Dive Lab, Inc. per company policy.
The training brings the technician into the specialized KMDSI/Dive Lab program, allowing for advice and assistance in all equipment problems and issues. All technicians receive KMDSI technical updates and bulletins, as well as newsletters. The KMDSI Technician Course does not allow the Technician to do repairs for profit; ONLY KMDSI DEALERS CAN PERFORM REPAIRS FOR PROFIT.
This post-graduate course is separate from the components of the core diving program and therefore is not accredited by the ACCSC. Any accreditation and certifications pertaining to the course are listed within the course description.
Divers Institute of Technology itself is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and licensed by the Washington State Workforce Training and Education Coordinating Board (WTECB).
Three-Day (24-hour) Course. Course details:
The course instructs personnel how to correctly overhaul the demand regulator side block and all associated Helmet and Band Mask components, and also teaches what repairs should only be accomplished by dealers or those with specialized training. This course does not teach face port insert replacement or fiberglass and gel coat repair; however, it does teach identification of insert and fiberglass damage and how and where to have repairs done.
| Name | Total |
|---|---|
| Introduction | 1 |
| Use of Kirby Morgan Operational Check Lists A2.1 thru A2.6 | 2 |
| Daily pre/post dive procedures | 1 |
| Monthly helmet inspection procedure | 2 |
| Supervisor pre-dive inspections | 1 |
| Supervisor in water checks | 1 |
| Calculation of proper supply pressure and volume requirements | 1 |
| Face Port Insert inspection and testing | 1 |
| Cleaning and sanitizing | 3 |
| Helmet and Band Mask annual overhaul procedures | 7 |
| EGS interface procedures and configurations | 1 |
| How to teach the KMDSI Helmet/Band Mask Operator/User Course | 2 |
| How to properly log maintenance and repairs | 1 |
| Totals | 24 |
As a diver, your life depends on your helmet. In the Kirby Morgan Hat Technician course, you’ll learn how to fix and maintain this critical piece of equipment.
The first part of this course is in the classroom, learning about legal do’s and don’ts and going through the technician manual. The second part of the course you spend down in the shop doing hands on work. You’ll tear down a hat completely to the shell, inspect everything, replace all the soft goods, put it back together, and adjust it.
The Helmet and Band Mask course is designed and intended to teach commercial divers, tenders, and technicians how to perform routine maintenance, annual inspections, and repair of Kirby Morgan Helmets and Band Masks and instructs personnel in the KMDSI/Dive Lab recommended configuration and use of KMDSI Helmets and Band Masks.
DIT students can register for the Kirby Morgan Hat Technician Course once they’ve completed their fourth month of training.
100% attendance for the whole course is required to pass the class and receive certification.
Divers Institute of Technology in Seattle, WA also offers these 2 programs at 1341 N. Northlake Way, Suite 150, Seattle, WA 98103.
Certificate
Diploma