Builder
Certificate
Welding is a Certificate program offered by Harmel Academy of the Trades in Grand Rapids, MI. The program takes 2 semesters after Foundations (4 in all) to complete.
Harmel’s 2nd year Welding Program provides the rigorous training required to work in construction, manufacturing, automotive and shipbuilding, as well as the intellectual formation and confidence that allows a man to take responsibility for work that has to hold under load.
This program is designed to prepare students to take their G3 welding certification learning both concepts and advanced techniques in welding for a wide range of welding career paths.
Steel doesn’t care what you intended. A weld either holds or it doesn’t, and the men who find out are the ones standing underneath it.
A welder joins metal; a fabricator builds the thing being joined. He reads a print, lays out the material, cuts it with a saw, torch, or plasma, grinds the edges clean, clamps it square in a jig he may have had to build first, and then runs the bead. MIG, TIG, stick, flux-core — each has its metals, its positions, and its reasons. He sets his machine by material and thickness before he strikes an arc, because the settings are most of the weld.
The work divides roughly three ways. Structural — beams, channels, base plates, the skeleton of a building. Miscellaneous — railings, frames, brackets, the steel a building needs that no catalog sells. Architectural — nonferrous work where the weld will be seen and has to look as good as it holds.
Underneath all of it is metallurgy: what heat does to steel, why a weld fails where it fails, which metals will join and which won’t. A welder who understands that stops guessing. If you want work that stands in front of you at the end of the day and either passes inspection or doesn’t, this is the trade.
More than a trade school. At Harmel, a young man is trained in the skilled trades, schooled in a robust humanities curriculum, formed spiritually through a life of common prayer, and prepared for excellence by living in an intentional community.
Prerequisite: Foundations of Skilled Stewardship. The prerequisite for this program is completion of the FSS program. The second year is not automatic.
Students are invited by faculty into a specific second-year program. The invitation rests on what a man shows during Foundations: his work, his judgment, and how he carries himself in community.
Thank you for considering Harmel Academy of the Trades. Before you apply, please be sure to read carefully through our website to make sure you understand the goals and unique community of our school.
New students. Preparing for your future begins today. Our application process is the first step in discerning your future with Harmel Academy. Consider making time to pray, asking what Our Lord is asking of you and your next steps as a man.
Although Harmel has rolling admissions, we recommend that each prospective student prepare and submit all his application materials as efficiently as possible. Timeliness and attention to detail are considered in our application process.
At the time of application, have the following prepared:
Good practice: Please reach out to your references in advance, asking them to be timely in submitting their letters of recommendation. We will email your references a link to submit their letters. Please notify your references that this email sometimes gets directed to spam folders.
ACT and SAT scores are not required. Harmel Academy does not discriminate in its admissions on the basis of race, color, or national or ethnic origins.
Important dates for 2027-28. Application opens: July 1, 2026.
Second-year program. Prerequisite: Foundations of Skilled Stewardship. Length: Two semesters — ¾-to-full-time worker / part-time student.
How the year works. Foundations covers basic welding and the introductory trades coursework. In his second year a man works three-quarters to full time as a fabrication or production welder with a Harmel collaboration shop while carrying two semesters of part-time study. He earns through most of the week and is in the shop on campus the rest of it.
One requirement particular to this program. Welding students live on campus for the duration of the program.
Time at Harmel. Combined four semesters (Foundations Year + Advanced Welding courses).
2026-2027 Academic Calendar.
Fall Semester.
Spring Semester.
*Students are required to determine their work schedule / breaks with their employer.
| Subject # | Name | Credits |
|---|---|---|
| MST 104 | Blueprint Reading, Schematics, and CAD | 2 |
| TRA 109 | Safety | 2 |
| WLD 110 | Basic Welding | 4 |
| WLD 210 | Advanced Welding | 3 |
| WLD 310 | Intro to Fabrication | 3 |
| MTH 201 | Math for Tradesmen | 3 |
| MST 205 | Robotics | 4 |
| HUM 203 | God and Man at Work III | 3 |
| HUM 204 | God and Man at Work IV | 3 |
| FS 101 | Formation Seminar I | 1 |
| FS 102 | Formation Seminar II | 1 |
| Totals | 29 |
Attending an accredited institution means its programs have been reviewed against independent standards.
This program: Harmel Academy does not state an institutional accreditation for this program. Harmel Academy received its final license to operate on March 12, 2020; the licensing body is not named.
Pathways to payment. One important goal for Harmel Academy of the Trades is that it provides an opportunity for a young man to enter adulthood — spiritually, intellectually, and vocationally — without taking on crippling debt.
Because we are forming men in the Gospel of Work, and part of learning to work is working, we require that all men who attend Harmel work while they are at Harmel. To this end, we schedule our programming such that men have the opportunity to work 20-30 hours a week.
This also has the effect that men earn money that, should the man act with intention and frugality, can go a long way toward paying his way while at Harmel.
While Harmel makes no guarantees as to the availability of work, the certainty of employment, the consistency of work, or the level of wages, we do work to help our men connect with employment opportunities, and to make the most of them.
Tuition payment policy. Tuition for each semester is due in full on the first day of each semester. If you do not pay in full at the appointed day, enrollment will be revoked. Payment is accepted by cash, checks, or bank transfer.
Payment plans may be an option on a case-to-case basis. Students who are in need of a payment plan must submit a written explanation of circumstances that they feel would make them qualified.
Refunds. Tuition is refunded according to the following table, calculated after the first day of the semester and using calendar days.
Room fees may be refunded at the discretion of the Academy. Board (dining) fees are not refundable.
Housing deposit. On-campus students pay a housing deposit of $300 when they initially enter campus housing. This fee represents a $150 clean room deposit and $150 key deposit.
Failed courses. If a student does not complete a course with a passing grade, students must retake the course the following semester at an additional cost. The fee for the failed course will be determined by the amount of credit hours, calculated at $360 per credit.
The John Paul II Laborem Exercens Scholarship Competition (2025-26). Students accepted to Harmel Academy of the Trades compete for one full-tuition scholarship, one half-tuition scholarship, and two $2,500 scholarships. Each scholarship is renewable.
Alongside the trade. A welding student also completes two further semesters of God and Man at Work — Harmel’s integrated humanities coursework — along with formation seminars. The trade is what he will be paid for. The rest is what he will be.
| Subject # | Name | Credits |
|---|---|---|
| MST 104 | Blueprint Reading, Schematics, and CAD | 2 |
| TRA 109 | Safety | 2 |
| WLD 110 | Basic Welding | 4 |
| WLD 210 | Advanced Welding | 3 |
| WLD 310 | Intro to Fabrication | 3 |
| MTH 201 | Math for Tradesmen | 3 |
| MST 205 | Robotics | 4 |
| HUM 203 | God and Man at Work III | 3 |
| HUM 204 | God and Man at Work IV | 3 |
| FS 101 | Formation Seminar I | 1 |
| FS 102 | Formation Seminar II | 1 |
| Totals | 29 |
How the Welding Program works. Welding is Harmel’s one certificate path. It isn’t a registered apprenticeship, and a man doesn’t finish it as a journeyman — the trade doesn’t work that way. Welders are certified by test, on a specific process in a specific position, and a man collects those certifications across a career as the work calls for them.
What Harmel gives him is the time and the instruction to be ready for them. The coursework builds toward an AWS D1.1 3G certification, prepping and running weld coupons under test conditions using GMAW and SMAW.
Build toward a career. Harmel Academy offers pathways toward skilled trades journeyman’s cards. This is a credential offered by national and state governing bodies that allows tradesmen to exercise their craft at an authoritative level.
This path is forged through an apprenticeship program which is governed by an employer. Typical apprenticeships require a combination of related technical instruction (RTI) hours and on-the-job learning (OTJ) hours.
It is possible to work in the trades without a journeyman’s card, but the study and experience gained through an apprenticeship program opens up more career possibilities, more leadership opportunities, and bigger paychecks. Students do not become journeyman at Harmel, they become men on their journey– master and commander of their grand adventure with Christ.
More than a trade school. Any man who joins the Harmel community as a student must understand: this isn’t a typical trades-training program. Harmel is designed to form the whole man through a community of prayer, work, and study.
Community. Harmel men live in households, committed to mutual support, accountability, and encouragement in the life of holiness. Household brothers encourage one another to be fully engaged in the Harmel community and in a life of sacrament and service. Each household has a specific charism and character, and each household comprises men of different programs and years, offering Harmel men the chance to build bonds of brotherhood and support that extend beyond their class schedule, employment partnerships, or year of study.
Prayer. Harmel men join daily to say Lauds, Vespers, and Compline. On days when their work schedule prevents them from joining community prayer, they are asked to pray solo, or to join with those who share the same work schedule.
Mass is offered on campus once a week on Formation Wednesday in the evening. Our chaplain is also available for confession and spiritual direction.
While Harmel Academy is unapologetically Catholic, non-Catholic students are welcome, and they too are encouraged to find an area church to call home while studying with us.
Meals. Community Dinners are provided Sundays through Thursdays. Due to the unique (yet also typical) working man’s schedule, breakfasts and lunches are prepared and managed by each student according to his need. Students have access to a full kitchen in the lounge of Harmel’s dorm as well as common refrigerator and pantry space.
Sport and recreation. Weightlifting, forging, camping, hiking, fishing, hunting, soccer, football, hockey, basketball, go karts, rebuilding motorcycles, Brazilian jiu-jitsu (a particular favorite of our chaplain)—Harmel men spend their leisure time in a variety of ways, on campus and off. There is plenty to do in the greater Grand Rapids area, whether you prefer the city, the country, or the beaches.
Campus. Harmel Academy is located in beautiful Grand Rapids, Michigan, across from Aquinas College, and on the property which once served as the minor seminary for the diocese of Grand Rapids.
Harmel Academy of the Trades in Grand Rapids, MI also offers these 6 programs at 2001 Robinson Road, Grand Rapids, MI 49506.
Certificate
Certificate
Certificate
Certificate
Certificate
Certificate