Kentucky Welding Institute

Certified Structural Welder

Flemingsburg
Flemingsburg, KY
Certificate Of Completion · On Campus
Certified Structural Welder
Accredited by ACCET (Accrediting Council for Continuing Education & Training) and licensed as a private career school in Kentucky.
Taught in person at the Flemingsburg, KY shop, Monday–Friday on one of three 8-hour shifts (6am–2pm, 2pm–10pm or 10pm–6am).
Tuition is $16,100.
This program takes about 18 weeks to complete. 640 clock hours at 40 hours a week.
A $100 non-refundable registration fee is charged to reserve your enrollment.
Federal Pell Grants are accepted for qualifying students (FAFSA code 043101); GI Bill®, WIOA and KEES funds are also accepted.

Certified Structural Welder is a Certificate Of Completion program offered by Kentucky Welding Institute in Flemingsburg, KY. The program takes 18 weeks to complete, with a total tuition of $16,100.

Program Overview

The CSW program covers welding processes specific to the sector of industry desired by a CSW student. This 18-week program covers GMAW, FCAW and SMAW with an option for limited GTAW in the 640 clock hours, plus Oxy-Fuel Cutting (OFC), Plasma Arc Cutting (PAC), and Carbon Arc Cutting (CAC). Classroom time for all KWI programs is the same enabling all programs to earn the job-site credentials for employment.

Program student learning objectives. Upon successful completion of the program students should be able to:

  • Safely work in the welding industry
  • Select and operate appropriate semi-automatic and manual process for an application
  • Select appropriate filler metals and shield gases for an application
  • Perform basic troubleshooting and maintenance on welding machines
  • Select and safety use thermal and mechanical joint preparation methods
  • Properly prepare base metals for welding
  • Identify welding discontinuities and make repairs
  • Pass weld qualification tests with GMAW, FCAW, and SMAW on plate

Successful completion. Students will be diversified in GMAW, FCAW, SMAW, and GTAW processes; able to perform fillet welds in all positions and groove welds in 1, 2, 3, 4G positions; able to read blueprints and welding symbols; weld test per AWS D1.1; and hold the NCCER Construction Core Card, OSHA 30 and ASHI First Aid and CPR certification.

What sets this Program apart

Industry comes first. Students train a minimum of 40 hours a week, building the repetition, discipline, and hands-on experience required for industrial work.

More than a welder. Students earn 28+ industry certifications and credentials, including AWS, NCCER, NCCCO Signalperson & Rigger, ASHI CPR/First Aid, TWIC, OSHA 30, MSHA, Basic Plus, and a CCS Drug & Toxicology Card.

A career with options. KWI prepares graduates to pursue welding work across construction, power generation, maintenance, shutdowns, structural, pipeline, and other industrial sectors.

Long-term goals. Training focuses on the habits, confidence, and professional readiness students need to build a career beyond their first welding job.

Unmatched learning experience. 15 students to one instructor. Full-time instructors can spend up to eight weeks each year back on the job, while a rotating group of part-time instructors comes directly from industry between projects. KWI has 7 Certified Welding Inspectors, 7 NCCER instructors and 5 NCCCO proctors on staff.

Admission Requirements and Process

All student applicants must be at least 17 years of age to be considered for any programs at Kentucky Welding Institute, and a high school diploma, GED, HiSET, or official high school transcript is required for the Certified Pipe Welder, Certified Structural Welder and Certified Fabricator programs. All applications are conditional and pending until required verification can be made: review of age, education requirements, catalog review and drug screening.

Admissions recommendations. KWI recommends all students have their vision tested and corrected, if necessary, before the commencement of training. Physical recommendations include standing for extended periods of time, good eye sight, ability to lift 50 pounds, bending, grasping, and maneuvering into small spaces. Students should be able to write, read and comprehend the English language at a 10th grade level. KWI does not enroll ATB students.

General Requirements

  • Minimum age
    All student applicants must be at least 17 years of age; an applicant under 18 must sign the enrollment agreement jointly with a parent, guardian, or guarantor and must reach…
  • High school diploma or equivalent
    A high school diploma, GED, HiSET, or official high school transcript is required, and a copy must be submitted to the school within two weeks of your conditional admission.
  • Student Catalog
    Students must have read the Student Catalog, available online, before enrolling.
  • Facility tour
    Students must have completed a tour of KWI facilities prior to their training start date.
  • Orientation modules
    Enrollees must complete the KWI orientation modules and pass the final exam.
  • Drug screen
    Student applicants must pass a drug screen, performed through a licensed third party vendor or by trained KWI staff, before enrollment.

Application Process

  1. 1
    Review the catalog and contact KWI
    Access and review the Student Catalog, available online, and contact KWI for guidance in setting goals and selecting the course appropriate for you; tours are available every other Monday at 11 a.m.
  2. 2
    Register and pay the registration fee
    Complete the online registration form, pay the non-refundable $100 registration fee and select your preferred start date — the first date you are eligible to begin training, not sooner than 30 days.
  3. 3
    Receive conditional admission
    KWI will acknowledge receipt of your registration, conditional admission status and assigned start date via email and provide directions to set up your student account and access the forms required for training.
  4. 4
    Submit forms and documents
    Review and submit all forms, along with any other required documents, within two weeks of admission notification; applications stay conditional until age, education, catalog review and drug screening are verified.
  5. 5
    Attend orientation and settle your balance
    Attend the mandatory orientation the Monday prior to your start date, complete your tour and enrollment agreement if not done previously, and be prepared to pay your full tuition and fees balance on orientation day.
  6. 6
    Report to class
    Report to class on your official training start date.

Program Schedule

This 640-hour program runs 18 weeks. Classes meet Monday–Friday, 40 hours a week, on one of three shifts: 1st Shift 6:00 a.m.–2:00 p.m., 2nd Shift 2:00 p.m.–10:00 p.m., or 3rd Shift 10:00 p.m.–6:00 a.m.

Start dates. Students will begin training on the designated Thursday of each month, subject to availability, with processing and a mandatory orientation (the Monday prior to the start date) preceding the start date. Completion dates are based on the length of the program selected. KWI publishes no specific future start dates; contact admissions to confirm the current start dates.

Holidays. Memorial Day, Independence Day, Labor Day, Thanksgiving Day & the Friday after, and Christmas Break (TBD). Holidays are subject to change.

Attendance. A student must achieve 90% cumulative attendance for completion of the program.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $16,100
Total Program Cost
≈ $21,500
FAFSA Code

Program cost. Tuition $16,100; Gear $1,200; Metal and Supplies $4,200; Total $21,500. A $100 non-refundable registration fee reserves enrollment and is deducted from the total tuition, which is due on or before the starting date. Included in your tuition: metal, electrodes and gases; the gear bucket; certification testing (students may be responsible for fees on retests following a failed attempt); lifetime job placement assistance; and lifetime brush up.

Gear. All required gear must be purchased by the student and be in possession by the first day of training; the KWI gear bucket must be purchased from KWI to ensure quality and consistency. A Premium Upgrade Option (Heavy Hitters Tig Rig) is available for $325.

Federal aid. Kentucky Welding Institute accepts Title IV funding from the U.S. Department of Education — Federal Pell Grant only (Pell capped at $7,395). Complete the FAFSA using KWI's Federal School Code 043101; the award amount is determined after FAFSA information is received.

Other funding. KWI is approved by the Kentucky State Approving Agency for Veterans Education to offer VA Educational Benefits (GI Bill®) to eligible individuals in approved programs; GI Bill® benefits cover the cost of tuition, gear, metal and supplies only. Kentucky students who have earned KEES money may request reimbursement of their tuition and fees up to the amount earned, and can apply for the Work Ready Kentucky Scholarship. KWI also accepts WIOA/TAA workforce funding, AWS and Mike Rowe Works scholarships, external hometown scholarships, and Sallie Mae career-training loans (apply at least 30 days before your start date).

Payment. Students must be prepared to pay their full tuition and fees balance on orientation day. KWI does not honor award letters or other “intents to pay” unless from a pre-approved vendor (WIOA and Veterans Education Benefits). Payments must be made via check or credit card; a service fee of 3.5% applies to credit card payments.

Housing (optional). Housing A $4,050 or Housing B $2,250 per 6-month term, utilities and Wi-Fi included; a $675 deposit secures a slot.

Refunds. Before the first day of class an enrollment may be canceled for a full refund, less a $100 fee; after training begins KWI retains a $100 fee and refunds tuition per the catalog's withdraw and refund policy.

Required Courses

Subject #Name
ASHI CPR/First Aid/AED
29101Welding Safety
29102Oxy-Fuel Cutting
29103Plasma Arc Cutting
29104Air Cutting and Gouging
29105Base Metal Preparation
29106Weld Quality
29107SMAW Equipment and Set Up
29108Electrode Classification
29109Beads and Fillet Welds
29110Joint Fit-Up and Alignment
29111Groove Welds with Backing
29112Open V-Groove Welds
29201Welding Symbols
29202Reading Welding Detail Drawings
29203Physical Characteristics and Mechanical Properties of Metal
29204Pre-heating and Post-heating of Metals
29205GMAW and FCAW Equipment Set Up and Use
29209GMAW Plate
29210FCAW Plate
29207GTAW Equipment and Filler Metal
29208GTAW Plate
Welding Math (Basic Trade Math, Pipe Math, Advanced Pipe Math)
Job Preparation
Totals

Career Outcomes

The CSW program is designed to prepare students for entry-level employment in plate welding, iron working and structural work in the welding industry; the course is designed to gain students employment in structural welding, iron work, and bridge welding.

Job placement. The following rates are as reported in the 2019 3rd party audit for job placement: graduates within program length 100%; graduates employed in field 93%.

Job placement assistance. KWI students receive employment training, including resume writing and practice phone calls with contractors, and KWI offers Lifetime Job Placement Assistance as long as KWI is operational. By law, KWI cannot guarantee a job to anyone.

What to expect as a Kentucky Welding Institute student

Student services. A program of coordinated student advising, educational and career planning, tutoring, academic support and special support services are available to all students and prospective students, including academic advising, career servicing, tutoring, housing, child care, personal counseling referrals and community resources. A digital employment board is accessible in the KWI training lobby.

Housing. KWI student housing is all within a ~2 mile radius of the shop. Housing A ($4,050 per 6-month term) is a shared bedroom with one roommate in a fully furnished student house; Housing B ($2,250 per 6-month term) is dormitory-style housing with four to five students per room. Utilities and Wi-Fi are included; a $675 deposit and a signed housing agreement secure a slot. All KWI housing is strictly drug and alcohol free.

Iron Cross Fitness. A 4,000 square foot gym at 64 Ross Street, directly across the road from KWI, with free membership and 24/7 access for enrolled KWI students.

Facilities. The 2600ft2 classroom facility includes 2 classrooms equipped with 3 presentation tv's and individual student electronic access. With over 6,400ft2 of shop space, KWI houses 42 welding booths offering both Lincoln and Miller options, 6 generator welders supporting the outdoor lab space and a versatile pipe flange and fitter lab.

Lifetime support. KWI offers Lifetime Job Placement Assistance as long as KWI is operational, and beginning one year after graduation, graduates can return annually to brush up on their skills, maintain or renew certifications, and get additional practice before a certification test.

Campus Address

Flemingsburg
1828 Maysville Road
Flemingsburg, KY 41041

Why Accreditation Is Important

Kentucky Welding Institute is accredited by the Accrediting Council for Continuing Education & Training (ACCET) and is a licensed private career school in the Commonwealth of Kentucky (Kentucky Commission on Proprietary Education). It is also regulated by the Indiana DWD Office for Career and Technical Schools, and KWI is an American Welding Society Accredited Testing Facility.

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

ACCET

Student Demographics

These are demographics for all students at the Flemingsburg Campus (IPEDS, 2024).

Gender Distribution
Women7.7%(11)
Men92.3%(132)
Race/Ethnicity Distribution
Primary Ethnic Group
White
95.8% · 137 students
White95.8% · 137
Hispanic/Latino2.1% · 3
Two or More Races2.1% · 3
Black/African American0% · 0
Asian0% · 0
American Indian/Alaska Native0% · 0
Native Hawaiian/Pacific Islander0% · 0
International Students0% · 0

Curriculum

Curriculum for the Certified Structural Welder program follows NCCER modules, with hours split between classroom and shop. Students must maintain an average of 2.0 (C, 70%) or higher; the final grade is 75% practical hands-on training and 25% classroom participation. Program requirements for completion: CSW: complete all seated classwork, KWI WPS 1, 3.

Required Courses

Subject #NameLectureLabExternalTotal
ASHI CPR/First Aid/AED5005
29101Welding Safety100010
29102Oxy-Fuel Cutting1809
29103Plasma Arc Cutting1607
29104Air Cutting and Gouging1809
29105Base Metal Preparation1809
29106Weld Quality1607
29107SMAW Equipment and Set Up1506
29108Electrode Classification1001
29109Beads and Fillet Welds11200121
29110Joint Fit-Up and Alignment1001
29111Groove Welds with Backing142043
29112Open V-Groove Welds195096
29201Welding Symbols1001
29202Reading Welding Detail Drawings1203
29203Physical Characteristics and Mechanical Properties of Metal1607
29204Pre-heating and Post-heating of Metals1506
29205GMAW and FCAW Equipment Set Up and Use110011
29209GMAW Plate1708
29210FCAW Plate152053
29207GTAW Equipment and Filler Metal110011
29208GTAW Plate12000201
Welding Math (Basic Trade Math, Pipe Math, Advanced Pipe Math)100010
Job Preparation5005
Totals505900640

Images

KWI student stick welding overhead
KWI student stick welding overhead
Welder striking an arc in the KWI shop
KWI student welding in a booth with sparks
Welders on the KWI shop floor
KWI students with their welding helmets in the shop

Videos

Frequently Asked Questions

Are tours available?
Absolutely! Tours are available every other Monday at 11 a.m. Schedule through the Plan a Visit tab.
Does KWI offer housing?
KWI has several rental options available to students. See Housing for details.
Do you accept FAFSA to cover tuition?
Yes. KWI accepts federal financial assistance for the Certified Pipe Program and the Certified Structural Program for those who qualify under the Federal Pell Grant Program. The Pell Grant is capped at $7,395. Federal School Code: 043101.
How do students pay for tuition?
Students acquire personal loans from their bank or other eligible borrowers, or seek private scholarships. KWI accepts Federal Pell Grants for qualifying students in specific programs. See Financing for more.
How long is the course?
Certified Pipe Welder takes 6 months (960 hours). Certified Structural Welder takes 4 months (640 hours). Certified Fabricator Welder takes 3 months (480 hours, 12 weeks).
Why choose KWI over community college?
Many community college associate degree programs take two years and include general education courses beyond welding. KWI focuses on welding from day one. Our 26-week Certified Pipe Welder program provides 40 hours of hands-on training each week, with an emphasis on pipe welding and a broad package of industry credentials. KWI versus Community College
Do you offer courses for specific welding processes and/or upgrades?
Certainly. Our custom welding course is for students that already possess some level of training and/or skill.
Can I transfer training I have already had?
Applicants with prior learning may request to have their transcript evaluated for possible transfer of credit.
Am I able to take classes while in High School?
No. All students must have a high school diploma or GED to be admitted. Minimum age is 17 at enrollment, 18 at graduation.
Is a diploma or GED required to enroll?
Yes, a high school diploma or GED is required for admission.

Other Programs at Flemingsburg

Kentucky Welding Institute in Flemingsburg, KY also offers these 3 programs at 1828 Maysville Road, Flemingsburg, KY 41041.

Kentucky Welding Institute

Certified Fabricator Welder

Certificate Of Completion

On-CampusFinancial Aid
Flemingsburg
Flemingsburg, KY
Next start
Rolling enrollment
Duration
11 Weeks
384 clock hours
App fee
—
Tuition
$13,200 for the Program
Kentucky Welding Institute

Certified Pipe Welder

Certificate Of Completion

On-CampusFinancial Aid
Flemingsburg
Flemingsburg, KY
Next start
Rolling enrollment
Duration
26 Weeks
960 clock hours
App fee
—
Tuition
$19,025 for the Program
Kentucky Welding Institute

Customized Welding Program

Continuing Education

On-CampusFinancial Aid
Flemingsburg
Flemingsburg, KY
Next start
Rolling enrollment
Duration
8 to 100 hours
8 to 100 clock hours
App fee
—
Tuition rate
$40 / clock hr
not a program total
Ready to get started?
Request information about Certified Structural Welder at Flemingsburg.
Certified Structural Welder