Lynnes Welding Training

Prep-CWI Course

New Hope Campus
Certificate Of Completion · On Campus
Prep-CWI Course
Lynnes Welding Training is accredited by ACCSC, but its skills and specialty courses, including this one, are not ACCSC-accredited classes.
Taught in person at the New Hope, MN campus on select start dates, Monday through Thursday 8:00am – 4:30pm; Friday 8:00am – 12:00pm.
Tuition for this 36-clock-hour specialty course is $1,500.
This course takes about 1 week to complete. 36 clock hours.
No separate application or registration fee is published by the school.
Federal student aid is offered only for the Combination Welder programs, not this course; contact the school about other funding options.

Prep-CWI Course is a Certificate Of Completion program offered by Lynnes Welding Training in New Hope, MN. The program takes 1 week to complete, with a total tuition of $1,500.

Program Overview

Course description. This course is designed for quality control & quality assurance personnel, project and contract managers, inspectors, welder, and welding supervisors intended on participating in the American Welding Society’s Certified Welding Inspectors seminar. This course is not intended to replace the AWS one-week seminar, but to supplement AWS’s one-week CWI seminar. During this course, students will review the D1.1 code book, along with other materials used during the one-week Certified Welding Inspector seminar. Upon completion of this course, you will gain the necessary knowledge and time to review the applicable materials before the one-week seminar.

Who should attend? Anyone registered for the AWS – CWI one-week seminar and individuals considering becoming a CWI.

Additional information.

  • Become an AWS Member to get a discount on books and seminars.
  • AWS - 2020 D1.1 Code Book.
  • AWS - Welding Inspection Technology (WIT-T2020) and Workbook (WIT-W2020).
  • Highlighter suggested.
  • Basic scientific calculator suggested.

Credential. Students who have successfully completed a course will earn a Certificate of Completion.

What sets this Program apart

Student to Teacher Ratio. Our 15:1 student to instructor ratio ensures personalized attention where students receive individualized support to excel in their training journey.

Industry Based Curriculum. We prioritize industry-based curriculum to ensure students gain practical skills and knowledge aligned with current industry standards, enhancing their employability and success in the field.

Experienced Instructors with Diversified Skills. All of our instructors joined LWT with real world, industry experience first. With diverse backgrounds ranging across multiple industries, processes and metals.

Certified AWS-ATS. To become a certified American Welding Society test facility, LWT had to undergo comprehensive evaluation and meets strict criteria for equipment, personnel, and procedures, ensuring consistent and reliable testing standards. LWT received the designation in 2018- the only location in ND.

Welding booths. The welding booths utilized at all locations were custom designed by LWT and are over-sized booths that are metal on three sides with a center post welding station that allows for instruction in multiple welding positions and disciplines. Each booth has its own multi-process welding machine, other necessary equipment, and an adjustable table to custom-fit every welder.

Admission Requirements and Process

Entrance into our training program is open to almost any prospective student with a desire to learn how to weld. A high school diploma/GED is preferred but is not necessary for individual skills training courses.

Potential students are encouraged to visit the school to discuss their employment goals with the staff to help determine which course(s) best suits them. Personal interviews by phone or in person are required for admission.

General Requirements

  • Age
    Applicants must be at least 17 years or older to enroll in classes, however they must turn 18 by the last day of class.
  • High school diploma or GED
    A high school diploma/GED is preferred but is not necessary for individual skills training courses.
  • Government-issued identification
    LWT will need to photocopy a government issued identification card or birth certificate to verify that the applicant will be over the age of 18 by the time of graduation.
  • Eye evaluation
    All applicants must pass an eye evaluation, with or without corrective lenses, to prove near vision acuity on Jaeger J2 at 12 in. or greater (≥30.5 cm).
  • Physical requirements
    By signing LWT's Enrollment Agreement, the student is affirming he or she can stand for long periods of time, bend, grasp, has good eyesight, can move in small areas, and is able…
  • English language
    Our text, films and materials require that you can read, write, communicate, and understand the English Language at a 6th grade level.
  • Admissions interview
    Personal interviews by phone or in person are required for admission.

Application Process

  1. 1
    Review the catalog and choose a course
    Obtain a copy of the Course Catalog online at www.learntoweld.com. Potential students can also contact the school for guidance in selecting course(s), if necessary.
  2. 2
    Complete the application
    Read and complete the Application. Refer to the class start schedule to select starting date preferences.
  3. 3
    Tour the school
    Visit the school for a tour.
  4. 4
    Submit your documents
    Submit a valid photocopy of a government issued identification card, birth certificate, or passport, and pass the eye evaluation described in the admissions requirements.
  5. 5
    Submit payment
    All required items must be submitted electronically or in person along with payment. Make the check or money order payable to Lynnes Welding Training, Inc. LWT does not accept cash for tuition.
  6. 6
    Confirmation and first day
    The school will acknowledge student enrollment by phone, email or mail along with the orientation and start dates. Personal Protective Equipment is required from the first day of class; report to the school on the first day of class.

Program Schedule

Monday through Thursday 8:00AM – 4:30PM; Friday 8:00AM – 12:00PM. This course is only available on certain start dates. Please inquire for more information.

Specialty course start dates are not published; contact the school (701-893-2295 or dave@learntoweld.com) to discuss upcoming offerings, or ask about training and testing at your own facility.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $1,500
FAFSA Code

Cost. Tuition $1,500 for this 36-clock-hour specialty course. Specialty Classes have different pricing; contact the school for more information.

Payment. Tuition and welding supplies (if applicable) must be paid in full before the student starts the first day of class unless a funding commitment letter has been received from a pre-approved outside funding source or agency for the tuition. LWT accepts cashier’s checks, money orders, checks, Visa, MasterCard and Discover. A downpayment of $100 is required to reserve a seat in an upcoming class. All required documents and payment arrangements are preferred to be received two weeks prior to the start date.

Federal financial aid. Federal financial aid (Pell Grants and Direct Loans) is offered only for the 480 Hour Combination Welder I and 640 Hour Combination Welder II Programs, so it is not available for this course.

Other funding.

  • Trade Adjustment Act (TAA), Workforce Innovation and Opportunity Act (WIOA), Division of Vocational Rehabilitation and Motivational Educational Training, Inc. (MET, Inc.) may help eligible students; scholarships are listed at https://learntoweld.com/financial/scholarships/.

Curriculum

36PREPCWI Prep-CWI Course: 1 week (36 clock hours). This course is designed for quality control & quality assurance personnel, project and contract managers, inspectors, welder, and welding supervisors intended on participating in the American Welding Society’s Certified Welding Inspectors seminar.

Required Courses

Subject #Name
36PREPCWIPrep-CWI Course

Career Outcomes

Employment assistance. To assist our students in becoming employed welders, we make every attempt to expose our students to employment opportunities in the local and regional market. On a regular basis, LWT hosts local employers and employment agencies to address the students and let them know of the opportunities available in the marketplace in the welding industry. Students receive assistance to build an industry-specific resume and participate in mock interviews prior to graduation, and an alumnus who is seeking their first welding career opportunity is invited to return to LWT to practice, without cost, for up to 2 hours (requested within 60 days of graduation).

No employment is guaranteed as a result of this education.

Campus Address

New Hope Campus
4000 Winnetka Avenue North
Suite 100
New Hope, MN 55427

Why Accreditation Is Important

Lynnes Welding Training, Inc. is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC), a recognized accrediting agency by the U.S. Department of Education. Welding Skills Courses are not classes accredited by the ACCSC.

LWT is licensed as a private career school with the Minnesota Office of Higher Education pursuant to Minnesota Statutes, sections 136A.821 to 136A.832.

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

Accrediting Commission of Career Schools and Colleges (ACCSC)

Testimonials

The staff at Lynnes Welding Training is exceptional to work with, especially when it comes to organizing training sessions or last minute attendee changes. American Crystal employees appreciate the individual instruction and our company appreciates the high certification rates. Lynnes Welding Training is a valued partner in advancing the skills of our workforce.

Curt Hansen
Training Coordinator – American Crystal Sugar Co. (Workforce Training Testimonial)

Lynnes goes beyond the basic weld development of its students which has been proven through the alumni we have working with us today. If you are looking for a fast track into a great career opportunity, Lynnes has a proven track record in providing companies with reliable employees that have the knowledge and skill set to comfortably transition into a production welding career!

Jesse E.
Plant Leader – Degelman (Workforce Training Testimonial)

Images

Lynnes Welding Training instructor reviewing paperwork with a student in the shop
Lynnes Welding Training instructor reviewing paperwork with a student in the shop
Lynnes Welding Training students and instructor at a welding table
Students welding in the Lynnes Welding Training shop
Lynnes Welding Training sign on the school building

Videos

Frequently Asked Questions

How do I register for welding training?
Contact the admissions office: Fargo campus 701-373-0658; Bismarck Campus 701-751-4256; New Hope Campus 763-270-0512 https://learntoweld.com/get-a-welding-training-information-packet/
What are the eligibility requirements for enrolling?
Entrance in our training program is open to almost any prospective student with a desire to learn how to weld. https://learntoweld.com/admission/admission-requirements/
Would you accept a high school/GED from a foreign country?
A high school diploma/GED is preferred but is not necessary for individual skills training courses. However, you must have a valid high school diploma, GED or academic transcript to be eligible for the 480 Hour Combination Welder I Program or 640 Hour Combination Welder II Program.
What days/hours does the course run?
All classes meet daily. Monday through Friday 7:00am – 3:30pm at all campuses.
Can you enroll part time?
We offer part time night courses at select campuses.
What is included in the cost of tuition for the Combination Welder program?
Classroom training materials including workbooks, blueprints, pipe layout and symbols. All shop materials are included, which are pre-cut and beveled. There is also an opportunity to earn up to 19 – Welder Certifications throughout the Combination Welder I and Combination Welder II Programs (a value of $4,200 alone). https://learntoweld.com/admission/course-tuition/
What forms of payments are accepted?
LWT accepts cashier’s checks, money orders, checks, Visa, MasterCard and Discover (Nonrefundable 3% Convenience fee for all credit card purchases). Please note that tuition and welding supplies (if applicable) must be paid in full before the student starts the first day of class, unless a funding commitment letter has been received from a pre-approved outside funding source or agency for the tuition. Also, in order to secure registration for a future class, a deposit of 10% of the tuition is required.
When attending LWT do you have any housing options?
At both locations, we can provide a list of housing options available to the students of LWT. LWT does not endorse any of the listings and is not responsible for any housing related issues. Securing housing is the responsibility of the student. We suggest that you contact your housing preference far in advance, and if possible visit the location prior to leasing.
Are there any funding options to help pay for tuition?
There are several funding options available to help: The 480 Hour Combination Welder I and 640 Hour Combination Welder II Programs are eligible for Federal Financial Aid for those that qualify through the Department of Education’s FAFSA process. https://fafsa.ed.gov/ Other loan options include: the Bank of North Dakota’s New Deal Student Loan; and personal loans through banks and credit unions. http://mystudentloanonline.nd.gov/ Scholarships may be available through Dollars for Scholars, Praxair, LWT, and the American Welding Society. https://learntoweld.com/school-policies/financial-aid/scholarship-information-2/ A student may also qualify for tuition assistance from Federal and State programs. Please contact the Financial Aid office by emailing financialaid@learntoweld.com for further information about funding options.
Do you accept the Pell Grant?
At this time, the Combination Welder II Program is the only program eligible for Federal Pell Grants.
Do you accept the GI Bill®?
ND locations only at this time. All of our programs spanning 120 hours or longer qualify for funding through the GI Bill®. Simply request your eligibility form through EBenefits and then call our Fargo School at 701-373-0658 or Bismarck School at 701-751-4256 for further information. https://www.ebenefits.va.gov/ebenefits/homepage ‘‘GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by VA is available at the official U.S. government Web site at https://www.benefits.va.gov/gibill.”
Is your school an approved training center for Veteran Affairs (VA) Vocational Rehabilitation and Employment program?
Yes! You may be eligible for VA Voc Rehab benefits if you have received a discharge other than dishonorable, Have a service-connected disability rating of at least 10%, and are within 12 years from your date of discharge or date notified of your VA disability rating. Please contact your local VA VR&E office to apply.
Do you help with job search?
We make every attempt to expose our students to employment opportunities in the local and regional market. Please see our Course Catalog under Student Services. https://learntoweld.com/admission/course-catalog/ For any question you may consult our Course Catalog https://learntoweld.com/admission/course-catalog/ for answers. You can always call us anytime for any assistance.
Ready to get started?
Request information about Prep-CWI Course at New Hope Campus.
Prep-CWI Course