Ohio Technical College

Welding & Fabrication Technology

Cleveland Campus
Cleveland, OH
Diploma · On Campus
Welding & Fabrication Technology
Accredited by ACCSC; programs approved by the Ohio State Board of Career Colleges and Schools (Reg. No. 71-09-0253T).
All courses are taken on campus in Cleveland, Ohio, Monday through Thursday, 6 hours 15 minutes per day.
Tuition is $32,200.
This diploma program is 48 weeks (12 months) and 1,200 clock hours of on-campus training.
A $50 non-refundable application fee is required at the time of application.
Federal financial aid is available to those who qualify, including Pell Grants, FSEOG and Direct Loans (FAFSA code 011745).

Welding & Fabrication Technology is a Diploma program offered by Ohio Technical College in Cleveland, OH. The program takes 12 months, 1,200 clock hours, 48 weeks to complete, with a total tuition of $32,200.

Program Overview

The Welding and Fabrication Technology program can give students the opportunity to develop the welding skills necessary to become entry-level combination welders, fitters, general fabricators, steel workers, and maintenance welders. This program also includes the study of welding math and symbols as well as blueprint reading.

The objective of the technical diploma programs is to provide a quality technical education with sufficient scope to include both fundamental and specialized technical training so that graduates are prepared to meet both present and future needs of industry. Students will be taught theoretical background, practical skills, and technical competence to assume entry-level positions in their respective areas of training. All graduates of the technical programs receive diplomas.

Admission Requirements and Process

Ohio Technical College does not teach high school curriculum, nor is basic, fundamental mechanic training repeated. Applicants for all programs are required to provide independent documentation such as a copy of their high school transcript, a copy of their high school diploma or other documentation of equivalency. Certificates of attendance, modified, or special diplomas are not acceptable. The student must provide all required documentation prior to starting classes; if the documentation is not received, the student will not be permitted to begin classes.

Applicants will first be interviewed by a College Admissions Representative, who will explain the programs in detail, answer questions about the College, and discuss career opportunities. To become enrolled, each applicant must complete an Admission Application; there is a $50 non-refundable application fee required at the time of application. If accepted, the student will then complete an Enrollment Agreement to be signed by the student, and if the student is under 18, his or her parent or legal guardian. Students must visit the campus within 60 days of the signed enrollment agreement date. Students will be accepted based upon a review of the enrollment and application information, student entrance assessments, and other factors relating to the student’s success.

General Requirements

  • High school diploma or equivalency
    Applicants must provide a copy of their high school transcript, high school diploma or other documentation of equivalency that meets state standards; certificates of attendance,…
  • Homeschooled applicants
    Transcripts from a nationally recognized and accredited homeschool program, or detailed homeschool transcripts plus a second academic indicator such as the SAT, ACT, GED, or…
  • Secondary school outside the United States
    A credential evaluation from a member of the National Association of Credential Evaluation Services (NACES), an official English translation of records not prepared in English,…
  • Admissions interview
    Applicants are first interviewed by a College Admissions Representative.
  • Admission Application and $50 fee
    Each applicant must complete an Admission Application; a $50 non-refundable application fee is required at the time of application.
  • Enrollment Agreement
    If accepted, the student completes an Enrollment Agreement signed by the student and, if under 18, his or her parent or legal guardian.
  • Campus visit within 60 days
    Students must visit the campus within 60 days of the signed enrollment agreement date for an informative session and a tour of the College’s facilities.

Application Process

  1. 1
    Apply and complete a Career Planning Session
    Apply to OTC and complete a Career Planning Session with a College Admissions Representative, who will explain the programs, answer questions about the College, and discuss career opportunities.
  2. 2
    Visit campus and take the Admissions Assessment
    Visit campus to learn about Financial Aid, Housing and your training program, and take an Admissions Assessment within sixty (60) days of application.
  3. 3
    Complete the FAFSA
    Complete the FAFSA within seven (7) days (making application after October 1st). The FAFSA code for Ohio Technical College is 011745.
    FAFSA Code for Cleveland Campus: 011745
    Complete FAFSA Application
  4. 4
    Apply for housing
    Apply for housing; OTC recommends reserving housing through Collegiate Housing Services at least ninety (90) days prior to your scheduled start date, as space is limited.
  5. 5
    Send final transcripts
    Have your high school send final transcripts; all required documentation must be provided prior to starting classes.
  6. 6
    Attend New Student Registration
    Attend New Student Registration the week before the start, then kick off your career.

Program Schedule

This diploma program is 48 weeks (12 months) and 1,200 clock hours, per the 2026/2027 catalog price table. All courses are taken on campus. Each student must attend six hours and fifteen minutes (6:15) per day, Monday through Thursday, to be considered a full-time student; there is no part-time attendance at Ohio Technical College. Generally, students in Diploma programs attend 300 clock hours per quarter.

Technical faculty is available to help students Monday–Thursday before and after class as well as all day Friday to provide extra assistance to any student. Maximum class size is 25 students unless otherwise indicated. Course numbers are for reference only; the sequence of course offerings may vary depending on scheduling needs.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $32,200
Total Program Cost
≈ $34,300
FAFSA Code

Program cost (2026/2027 catalog price table):

  • Welding & Fabrication Technology (diploma) (12 months, 1,200 clock hours, 48 weeks): tuition $32,200; fees $1,200; program supplies $900; total cost $34,300.

Fees include: Technology Fee, Graduation Fee, and All Student Activity Fees. All pricing effective as of August 1, 2026.

Ohio Technical College has been approved by the U.S. Department of Education, Office of Student Financial Assistance to participate in federal financial aid programs. The FAFSA code for Ohio Technical College is 011745. Types of financial assistance include agency funding, parent loans, student loans, grants and scholarships: Direct Subsidized, Direct Unsubsidized and Direct PLUS loans; the Federal Pell Grant, the Federal Supplemental Educational Opportunity Grant and the Julius A. Brenner Founder’s Grant.

Veterans’ educational benefits are available to eligible students, and Ohio Technical College participates in the U.S. Department of Veterans Affairs Yellow Ribbon Program. Ohio Technical College also provides an institutional loan to assist students in meeting their educational goals; all payments will be up to 12 months in length, with zero accrued interest.

Curriculum

Technical courses for this program, from the course descriptions in the Ohio Technical College 2026/2027 catalog. Course numbers are for reference only; the sequence of course offerings may vary depending on scheduling needs. All courses are taken on campus.

CourseTitleClock hoursQuarter credit hours
MWT-101Welding Introduction & History1509.00
MWT-102Electric Arc Cutting & Basic SMAW Processes1508.00
MWT-103Welding Mathematics I1508.50
MWT-104Basic SMAW Fundamentals & Practice Plate1508.00
MWT-105Welding Mathematics II & Blueprint Reading I1509.00
MWT-106Blueprint Reading II, Symbols & Abbreviations, & SMAW Advanced1508.50
MWT-107SMAW II Advanced Plate & Pipe1508.00
MWT-108GTAW, GMAW, & FCAW Principles & Practices1509.00
Total technical clock hours1,200

Required Courses

Subject #Name
MWT-101Welding Introduction & History
MWT-102Electric Arc Cutting & Basic SMAW Processes
MWT-103Welding Mathematics I
MWT-104Basic SMAW Fundamentals & Practice Plate
MWT-105Welding Mathematics II & Blueprint Reading I
MWT-106Blueprint Reading II, Symbols & Abbreviations, & SMAW Advanced
MWT-107SMAW II Advanced Plate & Pipe
MWT-108GTAW, GMAW, & FCAW Principles & Practices

Career Outcomes

The Welding and Fabrication Technology program can give students the opportunity to develop the welding skills necessary to become entry-level combination welders, fitters, general fabricators, steel workers, and maintenance welders. The advanced training portion of the program will provide students with the information, knowledge, and skills needed to achieve certifications through a number of recognized professional organizations; MWT-107 prepares students for the opportunity to take the welding certification tests.

Welding certifications available to students (these classes have an associated cost and only one will be reimbursed):

  • GTAW Stainless
  • GTAW Carbon Steel
  • GTAW Aluminum
  • SMAW
  • GMAW
  • FCAW

Graduation and employment rates (as provided to OTC’s accrediting agency):

Program2023 graduation2023 employment2022 graduation2022 employment2021 graduation2021 employment
Welding and Fabrication Technology76%77%69%78%72%70%

Career Services. Prior to graduation, students participate in a mandatory meeting with the career services staff covering resume writing, professional communication, the interview process, and how to professionally follow up on an opportunity. Twice a year, Ohio Technical College hosts a Career Fair attended by over 50 local and national industry employers. Career services assistance is provided to graduates for as long as needed, and a graduate who needs to refresh their technical skills is welcome to return to OTC and retake any course in the program from which they graduated at no charge. Ohio Technical College makes no guarantee of employment to our students or graduates.

Campus Location

Cleveland Campus
1374 East 51st Street
Cleveland, OH 44103

Why Accreditation Is Important

Ohio Technical College obtained accreditation through the Accrediting Commission of Career Schools and Colleges (ACCSC) in 1973. The curriculum and programming at OTC has also been approved through the Ohio State Board of Career Colleges and Schools (Ohio Reg. No. 71-09-0253T).

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

Accrediting Commission of Career Schools and Colleges (ACCSC)

Student Demographics

These are demographics for all students at the Cleveland Campus (IPEDS, 2024).

Gender Distribution
Women11.7%(80)
Men88.3%(603)
Race/Ethnicity Distribution
Primary Ethnic Group
White
62.4% · 426 students
White62.4% · 426
Black/African American18.7% · 128
Hispanic/Latino9.5% · 65
International Students6% · 41
Two or More Races2% · 14
American Indian/Alaska Native0.9% · 6
Asian0.3% · 2
Native Hawaiian/Pacific Islander0.1% · 1

Other Programs at Cleveland Campus

Ohio Technical College in Cleveland, OH also offers these 13 programs at 1374 East 51st Street, Cleveland, OH 44103.

Ohio Technical College

Alternating Current Emergency Systems

Certificate

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
6 months, 600 clock hours
App fee
$50
Tuition
$15,000 for the Program
Ohio Technical College

Collision Repair & Refinishing Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
60 Weeks
App fee
$50
Tuition
$41,250 for the Program
Ohio Technical College

Collision Repair & Refinishing Technology

Diploma

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
15 months
App fee
None
Tuition
$35,000 for the Program
Ohio Technical College

Complete Automotive Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
15 months
App fee
None
Tuition
$41,250 for the Program
Ohio Technical College

Complete Automotive Technology

Diploma

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
60 Weeks
App fee
$50
Tuition
$35,000 for the Program
Ohio Technical College

Diesel Equipment Technology

Diploma

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
60 Weeks
App fee
$50
Tuition
$35,000 for the Program
Ohio Technical College

Diesel Equipment Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
15 months
App fee
None
Tuition
$41,250 for the Program
Ohio Technical College

Generator Power Systems

Certificate

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
12 Weeks
App fee
$50
Tuition
$8,250 for the Program
Ohio Technical College

High Performance & Racing Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
72 Weeks
App fee
$50
Tuition
$48,000 for the Program
Ohio Technical College

High Performance & Racing Technology

Diploma

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
18 months
App fee
None
Tuition
$42,000 for the Program
Ohio Technical College

Powersport Technology

Diploma

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
12 months
App fee
None
Tuition
$28,000 for the Program
Ohio Technical College

Powersport Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
48 Weeks
App fee
$50
Tuition
$34,000 for the Program
Ohio Technical College

Welding & Fabrication Technology

Associate Degree

On-CampusFinancial Aid
Cleveland Campus
Cleveland, OH
Next start
Rolling enrollment
Duration
12 months
App fee
None
Tuition
$38,200 for the Program
Ready to get started?
Request information about Welding & Fabrication Technology at Cleveland Campus.
Welding & Fabrication Technology