Pennco Tech

OSHA 10

Blackwood Campus
Blackwood, NJ
Continuing Education · On Campus
OSHA 10
Pennco Tech is accredited by ACCSC; OSHA classes are not accredited by the ACCSC.
On campus at the Blackwood, NJ campus (the school says OSHA classes will be available there beginning in 2026).
This course is 10 hours of training delivered in two sessions.
No application or registration fee is published for this course.
The school publishes no financial aid information for this course.

OSHA 10 is a Continuing Education program offered by Pennco Tech in Blackwood, NJ. The program takes 10 hours to complete.

Program Overview

Pennco Tech helps you put safety first in the workplace. Serving as an OSHA-authorized training site, Pennco Tech offers courses that benefit students and professionals alike, ensuring that all participants are up-to-date on current standards. OSHA classes will be available in Blackwood, New Jersey beginning in 2026; our Bristol campus offers OSHA 10 and OSHA 30 courses instructed by an Authorized OSHA Outreach Trainer.

OSHA 10. This is a 10-hour training program tailored to entry-level workers. During this class, students learn how to uphold the health and safety of their respective job sites. Students enrolled in day and evening classes receive this training in applicable programs (HVAC/R, Plumbing and Heating, Electrician).

Not just for enrolled students, our Authorized OSHA training programs are available for professionals, as well; onsite and offsite options are available for employers.

What sets this Program apart

Pennco Tech is an OSHA-authorized training site, and its OSHA 10 and OSHA 30 courses are instructed by an Authorized OSHA Outreach Trainer. The school’s catalog describes Pennco Tech as one of only a few official OSHA test sites offering a Certified OSHA Trainer through the OSHA organization. Since training began in 2018, 1,736 students have been certified. The same training is built into Pennco Tech’s HVAC/R, Plumbing and Heating, and Electrician programs, whose students receive it automatically as part of the curriculum.

Admission Requirements and Process

The OSHA 10 & 30 courses are offered to enrolled students in applicable programs and to non-active students, including employers’ workers and supervisors. To be eligible for the completion of the program, and to receive a course certificate, you must be present for both sessions in their entirety.

General Requirements

  • Open to students and professionals
    The OSHA 10 & 30 courses are offered to enrolled students in applicable programs and to non-active students, including employers’ workers and supervisors.
  • Full attendance
    To be eligible for the completion of the program, and to receive a course certificate, you must be present for both sessions in their entirety.

Application Process

  1. 1
    Contact the Education department
    Please contact the Education department for details: call 856-232-0310 or reach out to EducationNJ@penncotech.edu.
  2. 2
    Attend both sessions
    In order to be eligible to receive a course completion card, you must be present for both sessions in their entirety.

Program Schedule

OSHA 10 is a 10-hour training program tailored to entry-level workers, offered at Pennco Tech’s Bristol, PA campus (Bucks County). The course runs in two sessions, and to be eligible to receive a course completion card you must be present for both sessions in their entirety. Employers can also arrange onsite or offsite training, including established and custom-designed programs delivered at the employer’s own location or elsewhere. For course schedules and costs, the catalog directs you to the Director of Education.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
FAFSA Code

The school does not publish a price for this course.

Career Outcomes

OSHA 10 is geared toward entry-level workers. Participants who are present for both sessions in their entirety are eligible to receive a course completion card. Pennco Tech’s Electrician, HVAC/R and Plumbing students have the opportunity to graduate with their OSHA 10 or OSHA 30 certification card depending on their future aspirations, and many employers use the course to train their employees and maintain workplace safety in compliance with current standards.

What to expect as a Pennco Tech student

The OSHA 10 and OSHA 30 courses are open to non-active students and professionals as well as enrolled Pennco Tech students. Each course is instructed by an Authorized OSHA Outreach Trainer and covers a wide range of topics geared toward its audience. You must attend both sessions in their entirety to receive a course completion card. Please note that OSHA classes are not accredited by the ACCSC.

Campus Address

Blackwood Campus
99 Erial Road
Blackwood, NJ 08012

Why Accreditation Is Important

Pennco Tech is accredited by ACCSC. *OSHA classes are not Accredited by the ACCSC.

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

Accrediting Commission of Career Schools and Colleges (ACCSC)

Curriculum

OSHA 10 is a 10-hour training program tailored to entry-level workers, taught as the OSHA 10 “Construction Safety and Health” certification course. During this class, students learn how to uphold the health and safety of their respective job sites. The OSHA 10-hour safety program consists of training for entry-level workers promoting the most updated health and safety regulations, so that workers are more knowledgeable about workplace hazards in the construction field.

Images

OSHA-Authorized Programs at Pennco Tech flyer

Frequently Asked Questions

Do you offer OSHA training?
Yes. At our Bristol, PA campus, we proudly offer Authorized OSHA 10 and OSHA 30 Outreach Training programs that can be used by students and local professionals. OSHA classes will be available in Blackwood, New Jersey beginning in 2026.

Other Programs at Blackwood Campus

Pennco Tech in Blackwood, NJ also offers these 12 programs at 99 Erial Road, Blackwood, NJ 08012.

Pennco Tech

Automotive Technology

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
40 Weeks
1,350 clock hours
App fee
$50
Tuition
$24,375 for the Program
Pennco Tech

Automotive Technology (Modified, Evening)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
100 Weeks
1,200 clock hours
App fee
$50
Tuition
$23,200 for the Program
Pennco Tech

Collision Repair (Modified)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
26 Weeks
900 clock hours
App fee
$50
Tuition
$17,150 for the Program
Pennco Tech

Diesel Technology

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
40 Weeks
1,350 clock hours
App fee
$50
Tuition
$24,375 for the Program
Pennco Tech

Electrician

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
26 Weeks
900 clock hours
App fee
$50
Tuition
$19,600 for the Program
Pennco Tech

Electrician (Evening)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
75 Weeks
900 clock hours
App fee
$50
Tuition
$19,600 for the Program
Pennco Tech

Electrician (Evening, 16 Hours/Week)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
56 Weeks
900 clock hours
App fee
$50
Tuition
$19,600 for the Program
Pennco Tech

Heating, Ventilation, Air Conditioning & Refrigeration

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
35 Weeks
1,200 clock hours
App fee
$50
Tuition
$24,900 for the Program
Pennco Tech

Heating, Ventilation, Air Conditioning & Refrigeration (Modified, Evening)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
80 Weeks
960 clock hours
App fee
$50
Tuition
$21,320 for the Program
Pennco Tech

Medical Assistant

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
18 Weeks
600 clock hours
App fee
$50
Tuition
$11,000 for the Program
Pennco Tech

Medical Assistant (Evening)

Program Certificate

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
50 Weeks
600 clock hours
App fee
$50
Tuition
$11,000 for the Program
Pennco Tech

OSHA 30

Continuing Education

On-CampusFinancial Aid
Blackwood Campus
Blackwood, NJ
Next start
Rolling enrollment
Duration
30 hours
30 hours
App fee
—
Ready to get started?
Request information about OSHA 10 at Blackwood Campus.
OSHA 10