Electrical Apprenticeship is a Certificate program offered by Rhode Island Construction Training Academy in Pawtucket, RI. The program takes 4 years / 576 related-training hours to complete.
Program Overview
RICTA’s Electrical apprenticeship is a four-year programme built to meet Rhode Island’s requirement of 576 hours of related classroom training. Unlike RICTA’s other trades, the NCCER Core Curriculum is not included in year one of electrical — the four years are electrical content throughout.
The programme follows the Mike Holt four-level electrical outline, which the academy publishes on its own Courses page. Tuition for the Mike Holt Electrical Program is priced separately from the academy’s standard trade tuition.
RICTA’s Apprenticeship Training Program provides students with the training and educational opportunities for a career in construction, and is designed to prepare people to become the craft workers, construction managers and industry leaders of tomorrow.
What sets this Program apart
- A registered apprenticeship: classroom training that runs alongside paid on-the-job hours with a sponsoring employer, rather than instead of them.
- Evening classes — two nights a week, 6:00pm to 9:00pm, Monday/Wednesday or Tuesday/Thursday — so the programme fits around a working day.
- Approved by the Rhode Island Department of Labor and Training, and built to Rhode Island’s related-training requirements for the trade.
- Discounted tuition for apprentices sponsored by an ABC Rhode Island member in good standing.
- Curriculum from NCCER, the construction industry’s national standard, with a graded module test kept on file and a transcript and certificate issued on completion.
Admission Requirements and Process
Entry is governed by RICTA’s published apprenticeship guidelines and by the Rhode Island State Apprenticeship Agency. The requirements and the registration steps are listed below.
General Requirements
- A completed registration form, returned to the RICTA office no later than one week before classes begin. A registration form is required for every year of school.
- Registration is first come, first served and class size is limited; the minimum enrolment for a class is seven students, and a class that does not reach it may be cancelled with a full refund.
- Registration with the Rhode Island State Apprenticeship Agency for an apprenticeship card. An apprentice may register at any time of year; a $500.00 deposit is required to receive the necessary paperwork.
- Tuition is due and payable in full with the registration form. For 2026/2027: $1,495.00 for an ABC RI member in good standing, $1,795.00 for a non-member, plus a required textbook at $145.00 and a $100.00 processing fee. The Mike Holt Electrical Program is $1,495.00.
- Students must notify the RICTA office if they change employer during the school year, or if their mailing address changes.
- Advanced placement or credit for previous formal education in the trade is decided only by the Rhode Island State Apprenticeship Agency, whose determination is binding.
School Information
Location
Why Accreditation Is Important
Attending a programme that has been reviewed against published standards means your training has been checked by someone other than the school teaching it.
This program: RICTA is a registered apprenticeship provider approved by the Rhode Island Department of Labor and Training. That is state approval of a registered apprenticeship, not institutional accreditation, and RICTA does not claim to hold any.
- Related classroom training that counts toward Rhode Island's apprenticeship requirements
- Runs alongside paid on-the-job hours with a sponsoring employer
- A transcript and certificate on completion
- Advanced placement decided by the state apprenticeship agency, not the school
Application Process
- 1Register with the stateRegister with the Rhode Island State Apprenticeship Agency for an apprenticeship card. This can be done at any time of year; a $500.00 deposit is required to receive the paperwork.
- 2Submit the RICTA registration formComplete the academy’s registration form and return it to the RICTA office at least one week before classes begin. Class size is limited and places are first come, first served.RICTA registration and guidelines
- 3Pay tuition in fullTuition is due and payable in full with the registration form, together with the textbook charge and the processing fee. No textbook is issued without a receipt of payment.
- 4Re-register each yearA registration form is required for every year of the programme, so the process repeats at each level.
Program Schedule
Classes begin every September and run through April, with a four-week break over Christmas and New Year. Each class is held two nights a week — either Monday and Wednesday or Tuesday and Thursday, 6:00pm to 9:00pm. This programme runs for 4 years.
Attendance is tracked closely: RICTA states that 144 hours of study is required by state regulations to complete each level, tardiness is recorded in 15-minute increments, there is no admittance after 7:00pm, and a student who misses more than ten classes without informing the school is automatically dropped, with a re-enrolment fee to return. Trade-specific make-up classes are not offered; hours to be made up are the student’s own responsibility, and sitting in on another RICTA class to make them up carries an additional fee and must be arranged in advance.
A grade is issued for each module in the textbook and the tests are kept on file at the RICTA office. A transcript and certificate are issued on completion — but not until tuition has been paid in full.
Curriculum
RICTA publishes no module-level curriculum document for this programme. The academy’s Course Info link for the Craft Laborer curriculum returns an error page, and the Electrical programme is described by reference to the Mike Holt four-level outline rather than a RICTA module list. No course table is shown rather than one assembled from another trade.
Cost of Attendance and Financial Aid Information
RICTA publishes one tuition rate for its apprenticeship year, not a per-programme price. For 2026/2027 it is $1,495.00 for an apprentice sponsored by an ABC Rhode Island member in good standing and $1,795.00 for a non-member, plus a required textbook at $145.00 and a $100.00 processing fee. The Mike Holt Electrical Program is priced at $1,495.00. Tuition is due in full with the registration form, and a registration form is required for every year of the programme — so a multi-year apprenticeship is paid a year at a time.
Registering with the state for an apprenticeship card requires a separate $500.00 deposit. A duplicate certificate costs $30.00 and a duplicate transcript $15.00. A student may withdraw before the second scheduled week of class and receive a refund less the $100 processing fee and the cost of the textbook, refunded if returned in new condition; after the second week no refunds or credits are issued. If a class is cancelled for not reaching its seven-student minimum, all money paid is refunded.
CSA records no programme price for this record, because RICTA prices the year rather than the programme. Confirm the current year’s rate with the academy.
RICTA prices the year, not the programme: $1,495 for an ABC RI member's apprentice, $1,795 otherwise, plus a $145 textbook and $100 processing fee,each year.
Career Outcomes
This is a registered apprenticeship, so the classroom training here runs alongside paid on-the-job hours with a sponsoring employer — the work hours count toward the OJT requirement and cannot also count as classroom training. RICTA is operated by Associated Builders and Contractors of Rhode Island, and publishes a Career Paths page and a job board on its own site.
What to expect as a RICTA apprentice
Expect evenings. Classes run two nights a week from September through April, and the academy is explicit that a work emergency does not earn an excused absence — work hours apply to on-the-job training and cannot also count as classroom hours.
Expect to sign in and out of every class legibly; RICTA marks a student absent for an illegible signature or a missing sign-out, and signing in for someone else is not permitted. Expect to bring your own textbook to every class, since class credit is lost without the required materials. Attendance reports go to both the student and the sponsoring employer four times a year — but are not sent until tuition is paid in full.
Frequently Asked Questions
School Information
Location
Why Accreditation Is Important
Attending a programme that has been reviewed against published standards means your training has been checked by someone other than the school teaching it.
This program: RICTA is a registered apprenticeship provider approved by the Rhode Island Department of Labor and Training. That is state approval of a registered apprenticeship, not institutional accreditation, and RICTA does not claim to hold any.
- Related classroom training that counts toward Rhode Island's apprenticeship requirements
- Runs alongside paid on-the-job hours with a sponsoring employer
- A transcript and certificate on completion
- Advanced placement decided by the state apprenticeship agency, not the school
