Lineworker is a Certificate Of Completion program offered by Western Technical College in El Paso, TX. The program takes 12 Weeks/3 Months to complete, with a total tuition of $10,610.
Program Overview
Electrical power-line installers and repairers install, or repair cables or wires used in electrical power or distribution systems. Western Tech has partnered up with the El Paso Electric Company to bring you a training/internship opportunity.
The graduate of this program will gain valuable knowledge in installing and repairing electrical devices, understanding of basic electricity and electronics, pole climbing techniques, mathematics, first aid, CPR, electrical safety, use of hand tools. The graduate will also gain valuable hands-on experience in a diverse set of technical areas.
What sets this Program apart
Are you ready to soar to new heights and electrify your career? Step into the heart-pounding world of linework, where the ordinary transforms into the extraordinary! Western Tech has partnered up with the El Paso Electric Company to bring you a training/internship opportunity that can take you to new heights!
Learn From the Best: You’ll learn from experienced instructors who have worked out in the field. Our instructors have over 160 years of combined experience in the industry.
Certifications: After completion of the course, you will be prepared to test for following professional certifications:
Admission Requirements and Process
The applicant understands that they must satisfy any specific admission requirements for the programs that are described in the school’s catalog and that they will not be fully admitted to WTC until all admission requirements have been fulfilled to WTC’s satisfaction. Individuals who seek admission to WTC are interviewed by an Admissions Representative; the pre-admission interview is designed to determine whether the applicant has a reasonable chance to complete the chosen program of study. Prospective students will tour the campus as part of the enrollment process, and they will complete the necessary forms and documents prescribed by the college and its regulating and accrediting bodies.
General Requirements
- High school diploma or equivalentTo be eligible for any program offered by WTC, a prospective student must present a high school diploma, high school transcript, or equivalency certificate (GED) recognized by the…
- English proficiencyClasses are taught in English; therefore, an adequate level of proficiency in reading, writing, and speaking the English language is required.
- Minimum ageAll applicants must be at least 18 years of age or older; however, applicants who have already earned their high school diploma, GED, or high school equivalency may enroll if they…
- Admissions interview and tourIndividuals who seek admission to WTC are interviewed by an Admissions Representative; prospective students tour the campus (a virtual tour for fully online programs) and complete…
- Background check and drug testApplicants must pass a criminal background check and an A10 panel drug test.
- Heavy performance evaluation and pole assessmentApplicants undergo an HPE heavy performance evaluation and take a pole assessment evaluated by EP Electric facilitators or the WTC program director.
- Weight limitMust meet a 300 lbs. weight limit, to include equipment and tools.
Application Process
- 1Meet with an Admissions RepresentativeTo schedule an interview with a friendly, knowledgeable admissions rep, call 1-800-225-5984 or fill out the request more information form. The interview can take place at either of our two campus locations.
- 2Complete Your Enrollment PaperworkAt the end of your interview, if you feel that Western Technical College is a great fit for your educational goals, your rep will help you complete the required enrollment paperwork, and if you meet the enrollment guidelines, we’ll reserve your seat for your selected start date.
- 3Complete Your Student Financial Planning ProcessCreate your FSA ID and file the FAFSA at studentaid.gov, listing Western Technical College (federal school code #014535); it’s best to have your FAFSA completed at least 14 days prior to the start of classes.FAFSA Code for Satellite Campus – El Paso Electric Company (Lineworker): 014535Complete FAFSA Application
- 4Start ClassThis is the fun part! You’ll love your educational experience at Western Tech, and you’ll feel good knowing that every day, you’re one step closer to the future you want.
Program Schedule
Training takes place at 13511 Montana Ave, El Paso, TX 79938, Monday–Friday from 8am–5pm; the program takes 12 weeks. All courses are taught in sequential order.
Cost of Attendance and Financial Aid Information
Program tuition and fees (Catalog Addendum, June 2026). Length: 12 Weeks/3 Months.
| Item | Amount |
|---|---|
| Tuition | $10,609.20 |
| Books & tools | $3,995.50 |
| Total cost | $14,604.70 |
Western Technical College may waive the $100 registration fee for all programs; DV students are not assessed a registration fee or state sales tax. Student Insurance, as listed for all programs, is required for enrollment and must be purchased through Western Technical College. Students are required to purchase books, supplies, and tools through Western Technical College.
Financial aid. Federal Pell Grant, Federal SEOG Grant, Federal Work-Study, Federal Direct Subsidized and Unsubsidized Stafford Loans and the Federal Parent PLUS Loan are available to eligible students, along with aid programs for veterans and military, scholarships, an in-school payment plan, long-term institutional financing (through a third-party servicer, up to 60 months) and private student loans. When completing the FAFSA, list Western Technical College (federal school code #014535). Active military and veterans, along with their families, receive a 10% tuition discount.
Required Courses
| Subject # | Name | Credits |
|---|---|---|
| ATM 131 | Mathematics for Electrical Lineman | 3 |
| FCR 112 | Competent First Responder | 1 |
| ELI 140 | Electrical Lineman Introduction | 3 |
| ELM 141 | Electrical Lineman I | 3 |
| ELE 131 | Basic Electricity and Electronics | 3 |
| ELM 142 | Electrical Lineman II | 3 |
| ELM 143 | Electrical Lineman III | 3 |
| ELO 110 | OSHA 10-Hour ET&D | 1 |
| EP 110 | Employment Preparation | 1 |
| Totals | 21 |
Career Outcomes
This entry-level experience is a catalyst towards building an approximate five-year progression path towards becoming a first-class line worker in the power industry. A typical apprenticeship program career track is: Helper – Apprentice (approximately 6-8 months); Apprentice (approximately 4 years); Lineworker.
Certifications and licensure. The experience gained from this program will prepare the student for the following professional certification examinations: First Aid Certification, CPR certification, and OSHA 10-Hour ET&D (the program page adds Pole Climbing, Pole-Top Rescue and Enclosed Space certifications).
ACCSC graduate outcomes (WTC’s 2025 ACCSC rates). 3-month program, reporting period December 2023–November 2024: 12 available graduates, completion rate 92%, employment rate 100%.
Career services. Although Western Tech offers placement assistance with career coaching, helping students develop a viable resume and job interviews, the College does not guarantee employment of specific salary levels after a student successfully completes their program of study.
Campus Address
Why Accreditation Is Important
Western Technical College (WTC) is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) which is listed by the U.S. Department of Education (DoED) as a nationally recognized accrediting agency. WTC is approved and regulated by the Texas Workforce Commission (TWC) Career Schools and Colleges Section, Austin, Texas. WTC’s degree-granting programs are approved and regulated by the Texas Higher Education Coordinating Board (THECB). All programs are approved to train veterans by the Texas Workforce Commission (TWC) and the Texas Veterans Commission (TVC).
- A reliable indicator of quality
- Approved program of study
- Qualified instructors
- Recognition by employers nationwide
Accreditations
Curriculum
Program outline: 9 courses, 504 clock hours, 21 semester credit hours. The sequential order of classes may differ from what is listed.
Required Courses
| Subject # | Name | Total | Credits |
|---|---|---|---|
| ATM 131 | Mathematics for Electrical Lineman | 48 | 3 |
| FCR 112 | Competent First Responder | 16 | 1 |
| ELI 140 | Electrical Lineman Introduction | 90 | 3 |
| ELM 141 | Electrical Lineman I | 90 | 3 |
| ELE 131 | Basic Electricity and Electronics | 48 | 3 |
| ELM 142 | Electrical Lineman II | 90 | 3 |
| ELM 143 | Electrical Lineman III | 90 | 3 |
| ELO 110 | OSHA 10-Hour ET&D | 16 | 1 |
| EP 110 | Employment Preparation | 16 | 1 |
| Totals | 504 | 21 |
What to expect
What You Will Learn: As a student in the Lineworker program, you will gain a basic understanding of electricity, learn how to install and repair electrical devices, learn and practice safe pole climbing techniques and other safety precautions, and learn how to use the tools needed to complete certain tasks.
Training Facility: Gaining the skills necessary to become a skilled Lineworker is important to your success. Training will take place at 13511 Montana Ave, El Paso, Tx 79938. This spacious facility comfortably houses equipment needed to provide you a Real-World experience.
Schedule: You will attend training Monday-Friday from 8am-5pm. In just 12 short weeks, you will be on your way …climbing new heights!
Be Work Ready: This entry-level experience is a catalyst towards building an approximate five-year progression path towards becoming a first-class line worker in the power industry.

