Commercial Driver’s License
Diploma
Plumbing is a Diploma program (Hybrid) offered by YTI Career Institute in York, PA. The program takes 12 months to complete, with a total tuition of $30,845.
YTI Career Institute - York offers a diploma program in Plumbing. This program will cover the installation, service, and maintenance of common plumbing fixtures found in residential and commercial buildings. Students will also gain an in-depth understanding of freshwater treatment, wells, well pumps, sewer systems, drainage systems, and venting. Additionally, they will learn about safe material handling, pumps, and electrical grounding.
The program will provide students with knowledge of various piping materials and their applications in accordance with the International Plumbing Code, International Building Code, and relevant National Fire Protection Association codes.
Length of Program: Twelve (12) months, consisting of five (5) ten-week quarters. Each term of courses is independent of each other, and therefore the order in which they are offered to students may vary. Maximum class section size in this program is fifty (50) students in an online class and maximum in lab is twenty-five.
Instructors. At YTI, you’re taught by instructors who have actually worked in the field – so you benefit from their real-world knowledge.
Industry-modeled Training. YTI’s Plumbing program combines qualified instruction and training built to reflect what plumbers actually do on the job—so students graduate job-ready, not just book-ready. Hands-on instruction using real tools, real materials, and real-world scenarios.
Job Placement Assistance. While employment is not guaranteed, our Career Services Department networks with prospective employers to match businesses that have employment needs with YTI graduates suited for those positions.
Best Practices. Focus on professionalism, job-site safety, and consistent, and quality results.
A diploma from a high school, a degree from an accredited post-secondary school, a high school equivalency transcript or diploma (issued by a state based on passing of the GED, HiSET or similar test) or home school credentials which meet state requirements are the basic requirement for admission for all programs.
To apply for admission, a student must complete and submit an Application for Admissions form. Copies of the applicant’s high school scholastic record, or college transcripts should be obtained by the applicant at this time. Applications for Admission are accepted throughout the year. Class terms start in Winter, Spring, Summer, and Fall. Prospective students are encouraged to apply as early as possible in advance of the requested term start as some forms of financial aid, to those students who qualify, give preference to first applicants.
The minimum required Wonderlic Scholastic Level Exam (SLE) score for Plumbing is 14. Applicants are able to take the SLE a maximum of 3 times in one year from the date of the most recent assessment, with a 60-day waiting period between the second and third attempt.
Applicants for programs offered in a fully online or hybrid learning (didactic on-line/labs on-campus) format must take two assessments to assess their readiness for on-line learning. The Computer Readiness Survey establishes the participant’s technical skills, access to technology, and level of preparedness specific to distance learning. The learning styles assessment assists in identifying learning preferences and provides helpful information regarding study techniques.
As part of their program materials, all students receive a device which is fully compatible with the school’s Learning Management System (LMS) and is preloaded with any program specific software.
The Plumbing program is offered in a blended (both didactic instructions online and lab simulations occurring oncampus) and residential delivery format (all didactic instruction and labs on campus). Online instruction is primarily asynchronous, with assignments and homework accessible 24 hours a day/seven days per week through the Learning Management System (LMS). Labs are scheduled 2-3 times per week. Students will need to reserve approximately 25-30 hours per week for educational activities and study. Students taking evening labs in the blended program need to plan on 1-2 lab sessions per week.
Hybrid programs have two lab shifts available (day and evening) and lecture and lab classes typically require 25-30 hours of educational work per week.
YTI begins new classes in Winter, Spring, Summer I, Summer II, and Fall of each year. The YTI Calendar in the catalog lists quarters starting January 11, 2027; March 22, 2027; May 31, 2027; August 16, 2027; October 25, 2027; January 17, 2028; and March 27, 2028. The program page on yti.edu gives the next start date as January 11, 2027.
Tuition. Plumbing: 5 quarters; Term 1: $7,925; Term 2-5: $5,730 per term; total tuition for program $30,845.
All tuition amounts listed include the cost of all required program materials and fees. This means that textbooks, uniforms, lab supplies, technology fees, grad fees and other standard materials needed to complete your program are included in the total tuition. No additional institutional fees will be charged for these items. All required books, tools, instruments, uniforms, supplies, and other instructional materials are included in the total cost of tuition. Students will receive these materials from YTI during the course of their program. The total cost of tuition-including all instructional materials-is established at the time the student signs the Enrollment Agreement. Even if costs increase, students will not be charged beyond the total tuition amount listed in their Enrollment Agreement.
Payment. After deducting all anticipated educational funding from the total charges for each term, any balance due to the Institute must be paid by the student out-of-pocket prior to the start of each term. Or, the student may request a monthly payment plan. The first payment on a monthly payment plan is due prior to the start of the first term. For those students who are not interested in applying for federal financial aid or any other source of educational funding, tuition for each term must be paid prior to the start of the term.
Financial aid. Students must complete the Free Application for Federal Student Aid (FAFSA). YTI school codes are as follows: Lancaster and York Campuses – 014765. Financial assistance comes from many sources - federal and state governments, private organizations, and YTI. Financial assistance may include scholarships, grants, work-study employment or loans. Most financial assistance is awarded based on the student’s financial need.
Veterans. YTI is approved by the Pennsylvania State Approving Agency for the training of veterans and their qualified dependents using Veterans Administration education benefits. Students eligible for Veterans educational benefits should be aware of and understand the necessity of complying with all school policies regarding attendance and academic achievement in order to continue receiving benefits. “GI Bill®” is a registered trademark of the U.S. Department of Veterans Affairs (VA).
Cost of Attendance. The Cost of Attendance budget is set by YTI and includes direct costs (tuition and fees - with books and supplies included in the fees) and indirect costs (an allowance for room and board, transportation, dependent care (if applicable); disability related expenses (if applicable), and some miscellaneous personal expenses). YTI’s estimate of a student’s cost of attendance, including estimated living expenses, for all programs at all campuses:
YTI’s Net Price Calculator (yti.edu/financial-aid/calculator/) estimates how much a career training program will cost based on what similar students paid; its calculations are based on projected 2023-24 YTI Career Institute costs.
| Subject # | Name | Credits |
|---|---|---|
| PLMDE 1001 | Trade Math | 2.5 |
| PLMDE 1031 | Construction Blueprint Reading | 4 |
| PLMDE 1702 | History of Plumbing | 4 |
| PLMDE 1014 | Plumbing Math | 4 |
| PLMDE 1778 | Fixtures, Appliances and Installations | 4 |
| PLMDE 1776 | Drain Waste Vent I | 2.5 |
| PLMDE 1786 | Drain Waste Vent II | 4 |
| PLMDE 1784 | Sewer, Storm & Water Lines | 4 |
| PLMDE 1705 | Water Supplies | 4 |
| PLMDE 1750 | Wells, Pumps & Piping Part I | 4 |
| PLMDE 1711 | Plumbing Code Part I | 3 |
| PLMDE 1751 | Wells, Pumps, & Piping Part II | 4 |
| PLMDE 1729 | International Mechanical Code | 4 |
| PLMDE 1709 | Special Piping | 4 |
| PLMDE 1741 | Plumbing Code Part II | 2.5 |
| PLMDE 1730 | Related Codes and Standards | 4 |
| PLMDE 1799 | OSHA 30 | 4 |
| PLMDE 1789 | Gasoline Tank, Venting, & Pumping | 2.5 |
| PLMDE 1713 | Brazing, Cutting & Metallurgy | 4 |
| PLMDE 1782 | Water Treatment | 4 |
| Totals | 73 |
This program is designed to prepare students for entry-level employment in the plumbing field. Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Disclaimer: Relocation may be required to enhance available career opportunities.
Licensure and certification. There are no statewide licensing requirements for entry-level employment in PA. Certain counties, townships, boroughs, or cities may have their own licensing or registration requirements, so students are encouraged to research the regulations in the jurisdictions where they intend to work. This program is designed to prepare students for entry-level employment in the plumbing field and does not, by itself, satisfy any local apprenticeship, work experience, examination, or licensing requirements that may be imposed by a municipality. Students have the opportunity to earn their OSHA 30 certification.
Graduation rate for the student body. The graduation rate for first-time full-time students who began their studies at YTI Career Institute (York and Lancaster) in Fall 2020 (124 students) and graduated within 150% of their program length (53 students) is 41%. The retention rate for first-time, full-time students who began their studies at YTI Career Institute (LA and YK) in Fall 2021 and were still enrolled or graduated by the end of Fall 2022 is 52%.
Career Services. Employment assistance is available from the Career Services staff. Students are prepared for the job search through career awareness, professional preparation, and a series of required workshops and seminars. While placement assistance will be provided, it is understood the school cannot promise or guarantee employment to any student or graduate. Alumni are offered life long career assistance, which includes the opportunity to attend career fairs and skill update workshops and the ability to audit courses included in the program from which they graduated, if space permits.
The main campus, located at 1405 Williams Road, is a one floor, 60,000 square foot facility, housing 29,460 square feet of learning space, student and faculty lounges, a learning resource center, and conference rooms. Classrooms feature overhead projection units and internet access. The building is smoke free, air-conditioned, handicapped accessible, and ADA compliant.
Learning online. All fully Online and Hybrid programs deliver lecture material primarily in an asynchronous fashion. Faculty post a weekly announcement to guide learners through their course objectives, and each assignment has a designated due date. Assignments are usually due on a weekly basis, with the week running Monday through Sunday. Learners login at their convenience; access to course materials is available 24 hours per day, 7 days per week, through the school’s Learning Management System (LMS), Canvas. All fully Online and Hybrid programs schedule synchronous sessions during the first week of the term and periodically throughout the course for question and answer periods and exam review. Sessions are recorded so all students have access to the material regardless of whether or not they attend the live session.
Student support. For content questions or extra help sessions, students contact their instructor via the instructor page in the course in the Canvas LMS. Students access the Student Services course in Canvas for information on student support services including resources regarding child care, housing, food pantries, shelters, transportation and other issues impacting the student’s ability to manage their coursework.
YTI Career Institute - York is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is licensed by the State Board of Private Licensed Schools, Department of Education, Commonwealth of Pennsylvania.
The Plumbing program requires 73 quarter credits.
| Subject # | Name | Credits |
|---|---|---|
| PLMDE 1001 | Trade Math | 2.5 |
| PLMDE 1031 | Construction Blueprint Reading | 4 |
| PLMDE 1702 | History of Plumbing | 4 |
| PLMDE 1014 | Plumbing Math | 4 |
| PLMDE 1778 | Fixtures, Appliances and Installations | 4 |
| PLMDE 1776 | Drain Waste Vent I | 2.5 |
| PLMDE 1786 | Drain Waste Vent II | 4 |
| PLMDE 1784 | Sewer, Storm & Water Lines | 4 |
| PLMDE 1705 | Water Supplies | 4 |
| PLMDE 1750 | Wells, Pumps & Piping Part I | 4 |
| PLMDE 1711 | Plumbing Code Part I | 3 |
| PLMDE 1751 | Wells, Pumps, & Piping Part II | 4 |
| PLMDE 1729 | International Mechanical Code | 4 |
| PLMDE 1709 | Special Piping | 4 |
| PLMDE 1741 | Plumbing Code Part II | 2.5 |
| PLMDE 1730 | Related Codes and Standards | 4 |
| PLMDE 1799 | OSHA 30 | 4 |
| PLMDE 1789 | Gasoline Tank, Venting, & Pumping | 2.5 |
| PLMDE 1713 | Brazing, Cutting & Metallurgy | 4 |
| PLMDE 1782 | Water Treatment | 4 |
| Totals | 73 |

YTI Career Institute in York, PA also offers these 24 programs at 1405 Williams Road, York, PA 17402.
Diploma
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Continuing Education
Associate In Specialized Technology
Diploma
Diploma
Diploma
Associate In Specialized Technology
Diploma
Diploma
Continuing Education
Continuing Education
Diploma
Diploma
Continuing Education
Continuing Education
Diploma
Continuing Education
Continuing Education
Continuing Education
Associate In Specialized Technology