CDL Training Course
Certificate Of Completion
HVAC/R Technician is a Diploma program offered by Delta Technical College in Ridgeland, MS. The program takes 35 weeks (9 months); 735 clock hours; 28 semester credits to complete, with a total tuition of $16,581.
The DTC HVAC/R program consists of seven 5-week modules. Each module contains basic subject content for training in the installation, repair and maintenance for the heating, ventilating, air conditioning and refrigeration industry and installation and trade skills, with an extensive “hands-on” experience as well as theory, equipment components and operation. The program welcomes any person with or without previous electrical, mechanical or construction training or experience.
HVAC/R techs provide a variety of services including repair, maintenance, and installation for heating, ventilation, air conditioning, and refrigeration equipment. The student is required to take and pass the EPA Section 608 Core, Type I, and Type II certification exams.
DTC requires all applicants to the school to provide proof of a high school diploma, recognized equivalency certificate, or documentation of home school completion. All applicants complete a personal interview with an authorized representative of the school and a Health Affidavit/Screening, and present a valid driver’s license, state issued ID, or United States passport.
Admission procedures. A visit to the school; a personal interview with an authorized representative of the school; and payment of the registration fee, if applicable, by the first day of class unless otherwise authorized (payment of the registration fee secures a student’s seat in a class). All other tuition and fees must be paid on the first day of class unless otherwise authorized.
Trial enrollment period. Students who enroll will be offered an opportunity to attend for up to three days without incurring a financial obligation, excluding the registration fee (and the D.O.T. Physical and D.O.T. Drug Screen for CDL students). Any student who withdraws within three class days of the official start date will not be considered to have started school, and their tuition obligation and cost of course materials will be waived.
Monday through Thursday, 8:00 a.m. – 1:15 p.m., 1:00 p.m. – 6:15 p.m., or 5:15 p.m. – 10:30 p.m. The maximum number of students in a typical classroom is 20 and 15 in lab.
| Start Date | Graduation Date |
|---|---|
| July 13, 2026 | March 25, 2027 |
| August 17, 2026 | April 29, 2027 |
| September 21, 2026 | June 3, 2027 |
| October 26, 2026 | July 22, 2027 |
| November 30, 2026 | August 26, 2027 |
| January 19, 2027 | September 30, 2027 |
| February 22, 2027 | November 4, 2027 |
| March 30, 2027 | December 9, 2027 |
| May 3, 2027 | January 27, 2028 |
| June 7, 2027 | March 2, 2028 |
Program cost (Delta Technical College Student Catalog 2026): Tuition $16,581; Registration Fee $100; Books $230; Lab Fee $550; Tools $470; Portable Electronic Device $340; Testing Fee $26; Total Cost $18,297.
The majority of Delta Technical College’s students receive some form of financial aid. Since DTC is not a traditional college, there is no deadline to apply for federal funding, grants or other kinds of financial assistance. Prospective students can apply for financial aid at any point prior to their selected program’s official start date.
When filling out your FAFSA (Free Application for Federal Student Aid), be sure to use the appropriate income tax year. The school code for Delta Technical College is 033683. DTC is approved for the Federal Pell Grant, William D. Ford Federal Direct Loan Programs, Federal Direct Subsidized and Unsubsidized Stafford Loan (Student) and Federal Direct PLUS Loan (Parents of Dependent Students). Federal grants and loans are available to those who qualify.
35 Weeks / 735 Clock Hours / 182 Additional Outside Clock Hours / 28 Semester Credits, in seven 5-week modules. Each module is 50 clock hours lecture, 55 clock hours supervised lab and 26 additional outside clock hours (4 credits).
| Module | Description |
|---|---|
| Basic Electricity | Electricity applied to comfort systems, testing and identifying electrical components, sizing electrical conductors and over current protection according to NEC; testing and installing controls, motors, and fans; diagnosing and troubleshooting in the HVAC/R lab. |
| Air Conditioning | Theory of heat transfer, refrigeration cycle, identifying and diagnosing refrigeration system components, sequence of operation; refrigerant recovery, recycle, evacuation and charging procedures. |
| Heat Pumps and Electric Heat | Heat pump applications (Air to Air, Geothermal, Multi-Split, Mini-Split, and Variable Refrigerant), components and theory of operation; electric heating furnaces; installing and troubleshooting these systems. |
| Installation and Trade Skills | Installation process and tool usage for air conditioners and mini-split systems, heat pumps, hydronic heat systems, and gas heat; measurements, fasteners, and basic building construction. |
| Gas Heat | Combustion theory and process, heating efficiencies, ignition systems, furnace configurations, gas properties, gas valves, regulators, sequence of operation and safety; maintenance, repair, and troubleshooting. |
| Indoor Air Quality | Filtering and media, electronic air cleaners, dehumidification, humidification and UV light air purification; residential load calculation; duct design, zone control and duct work. |
| Employment and Certification Readiness | Employment preparation, professionalism development and certification exam review (always taken last). |
The student is required to take and pass the EPA Section 608 Core, Type I, and Type II certification exams (the retake fee for the EPA is $25). Optional HVAC Excellence student employment ready assessment certifications (basic electricity, basic air conditioning, electric heat, heat pumps, gas heat, light commercial air conditioning, and light commercial refrigeration) are available at an additional cost.
Tool kit includes: soft tool bag, ratchet wrench and hex key inserts, mini tube cutter, magnetic long drivers, wire stripper, telescopic mirror, channel lock pliers, 10” adjustable wrench, needle nose plier, 6 in 1 screwdriver, left and right aviation snips, Fieldpiece multimeter, R22/410A manifold with 60” hoses, and mini level. Students are not allowed to use or provide their own gear or tools.
The program objective is to provide each student with the basic knowledge and skills as a quality entry level employee in the HVAC/R industries. The program will prepare you for entry-level careers in a number of roles, including but not limited to:
Other industry related fields include duct cleaners, service technicians, sheet metal, electrical, facilities maintenance, management, marketing, estimating and inspections. Successful completion of the HVAC/R course and EPA Section 608 Core, Type I, and Type II certification exams entitles the student to a diploma in HVAC/R. Employment by some employers may require a clean driving record, a criminal background check, a drug screen, relocation, climbing ladders, working in attics and crawlspaces, moving heavy equipment, working in harsh environments and being available for 24 hour service calls.
Career placement. The respective Program Director can provide assistance to currently enrolled students and graduates, including job placement assistance and guidance as they seek employment. DTC cannot and does not guarantee a student will obtain employment or will obtain a minimum starting wage.
Published outcomes (HVAC/R, 2024–2025, Mississippi Commission on Proprietary School and College Registration, License No. C-624; reported for DTC’s Mississippi campuses):
DTC is accredited by the Accrediting Commission of Career Schools & Colleges (ACCSC). DTC is approved by the U.S. Department of Education to participate in federally-funded financial aid programs.
Delta Technical College is licensed by the Mississippi Commission on Proprietary Schools and College Registration, Certificate No. C-624. Licensure indicates only that minimum standards have been met; it is not an endorsement or guarantee of quality. Delta Technical College is authorized for operation as a postsecondary educational institution by the Tennessee Higher Education Commission.
Delta Technical College in Ridgeland, MS also offers these 7 programs at 113 Marketridge Drive, Ridgeland, MS 39157.
Certificate Of Completion
Diploma
Diploma
Diploma
Diploma
Diploma
Diploma