Delta Technical College

Industrial, Commercial and Residential Electrician

Ridgeland
Ridgeland, MS
Diploma · On Campus
Industrial, Commercial and Residential Electrician
Accredited by ACCSC; licensed by the Mississippi Commission on Proprietary Schools and College Registration, Certificate No. C-624.
On campus at Ridgeland, MS, Monday–Thursday 8:00 a.m.–2:00 p.m. or 5:30–11:30 p.m.
Tuition is $17,082; total cost is $18,297 including registration, books, lab fee and tools.
30 weeks (7 months): 720 clock hours plus 180 outside hours, for 30 semester credits.
A $100 registration fee is charged and is included in the program’s total cost; payment secures your seat in a class.
Federal Pell Grants and Federal Direct Loans are available to those who qualify (FAFSA school code 033683).

Industrial, Commercial and Residential Electrician is a Diploma program offered by Delta Technical College in Ridgeland, MS. The program takes 30 weeks (7 months); 720 clock hours; 30 semester credits to complete, with a total tuition of $17,082.

Program Overview

The objective of the electrical program is for students to gain entry level employment as an Electrician, Electricians Helper or Electrical Apprentice. The program obtains this through a series of hands-on exercises as well as classroom instruction, and also teaches field and shop safety. Upon meeting graduation requirements, the student is entitled to an Industrial, Commercial, and Residential Electrician Diploma.

DTC’s electrician training classes give you the technical skills you need to install, maintain, and troubleshoot a variety of electrical systems, and enter the industrial, commercial or residential workforce prepared for an entry-level career.

Admission Requirements and Process

DTC requires all applicants to the school to provide proof of a high school diploma, recognized equivalency certificate, or documentation of home school completion. All applicants complete a personal interview with an authorized representative of the school and a Health Affidavit/Screening, and present a valid driver’s license, state issued ID, or United States passport.

Admission procedures. A visit to the school; a personal interview with an authorized representative of the school; and payment of the registration fee, if applicable, by the first day of class unless otherwise authorized (payment of the registration fee secures a student’s seat in a class). All other tuition and fees must be paid on the first day of class unless otherwise authorized.

Trial enrollment period. Students who enroll will be offered an opportunity to attend for up to three days without incurring a financial obligation, excluding the registration fee (and the D.O.T. Physical and D.O.T. Drug Screen for CDL students). Any student who withdraws within three class days of the official start date will not be considered to have started school, and their tuition obligation and cost of course materials will be waived.

General Requirements

  • Proof of education
    Proof of a high school diploma, recognized equivalency certificate, or documentation of home school completion.
  • Personal interview
    A personal interview with an authorized representative of the school.
  • Health Affidavit/Screening
    Completed Health Affidavit/Screening.
  • Identification
    Valid driver’s license, state issued ID, or United States passport is required.
  • Minimum age
    Must be 17 to enroll.

Application Process

  1. 1
    Connect with an Admissions Representative
    You are always welcome to walk-in to a DTC campus to meet an Admissions Representative during business hours – no appointment required. If you would prefer to schedule an appointment, the Admissions Team is available by phone at 866-733-6652 and will help schedule your interview and campus tour.
  2. 2
    Take your campus tour
    You will learn about DTC’s programs, explore the inside of the labs and classrooms, and see the support structure in place to help students succeed.
  3. 3
    Meet with the Financial Aid Team
    DTC’s Financial Aid Representatives help prospective students understand the options to help pay for school, including Federal Financial Aid, scholarships and grants, and can assist in filling out the FAFSA. Delta Technical College’s FAFSA school code is 033683.
    Complete FAFSA Application

Program Schedule

Monday through Thursday, 8:00 a.m. – 2:00 p.m. or 5:30 p.m. – 11:30 p.m. Maximum number of students in an academic classroom is 20 and maximum in a lab setting per instructor is 15.

Start DateGraduation Date
July 13, 2026February 18, 2027
August 17, 2026March 25, 2027
September 21, 2026April 29, 2027
October 26, 2026June 6, 2027
November 30, 2026July 22, 2027
January 19, 2027August 26, 2027
February 22, 2027September 30, 2027
March 30, 2027November 4, 2027
May 3, 2027December 9, 2027
June 7, 2027January 27, 2028

The Industrial, Commercial and Residential Electrician program is also offered at DTC Ridgeland’s satellite location, 100 Beasley Road, Jackson, MS 39206.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $17,082
Total Program Cost
≈ $18,297

Program cost (Delta Technical College Student Catalog 2026): Tuition $17,082; Registration Fee $100; Books $310; Lab Fee $375; Tools $430; Total Cost $18,297.

The majority of Delta Technical College’s students receive some form of financial aid. Since DTC is not a traditional college, there is no deadline to apply for federal funding, grants or other kinds of financial assistance. Prospective students can apply for financial aid at any point prior to their selected program’s official start date.

When filling out your FAFSA (Free Application for Federal Student Aid), be sure to use the appropriate income tax year. The school code for Delta Technical College is 033683. DTC is approved for the Federal Pell Grant, William D. Ford Federal Direct Loan Programs, Federal Direct Subsidized and Unsubsidized Stafford Loan (Student) and Federal Direct PLUS Loan (Parents of Dependent Students). Federal grants and loans are available to those who qualify.

Curriculum

30 Weeks / 720 Clock Hours / 180 Additional Outside Clock Hours / 30 Semester Credits. Each of the six modules is 60 clock hours lecture and 60 clock hours lab plus 30 additional outside clock hours (5 credits); modules can be taken in any order.

ModuleTopics
Electrical Theory / NEC / GroundingElectrical theory and circuits (atomic structure, Ohm’s law, magnetism, resistors); National Electrical Code — grounding and bonding, residential electrical services, navigating the NEC.
Meters / Lighting / BlueprintsElectrical and construction safety, introduction to OSHA, electrical test equipment; series, parallel and combination circuits; lighting; blueprints, construction drawings and schematics; overload protection, circuit breakers and fuses.
Electrical Mathematics / Conduit BendingPPE safety; batteries and other sources of electricity; construction and electricians math; device, pull and junction boxes; raceways, fittings, conduit types; hand bending conduit.
Conduit Bending / Terminations / Standby SystemsConduit bending, hand and power tool and fall protection safety; conductor installations (NEC 310), wire tables; medium-voltage terminations and splices (NEC 300); standby and emergency systems (NEC 701, 702, 705, 706).
Overcurrent Protection / 3 Phase Distribution / Load CalculationsBloodborne pathogens safety; alternating current; distribution equipment and services; commercial services and 3 phase circuits; single and three phase transformers; branch, feeder and service load calculations.
Motors / FA Systems / VDV / ControlsArc flash and lockout/tagout training; capacitors; motor theory, calculations and controls; control systems and circuits; voice, data, and video; fire alarm systems.

Tool kit includes: Channel lock 420, magnetic level, wire strippers, 4pc. screwdriver set, AC clamp meter, 25’ tape measure, 16oz claw hammer, and safety glasses. Students are not allowed to use or provide their own gear or tools.

Career Outcomes

The objective of the electrical program is for students to gain entry level employment as an Electrician, Electricians Helper or Electrical Apprentice:

  • Electrician
  • Electricians Helper
  • Electrical Apprentice

Electrician program students are trained to work inside or outside, answering service calls or working on jobs at any residence or business requiring the installation, repair, or maintenance of an electrical system.

Career placement. The respective Program Director can provide assistance to currently enrolled students and graduates, including job placement assistance and guidance as they seek employment. DTC cannot and does not guarantee a student will obtain employment or will obtain a minimum starting wage.

Published outcomes (Industrial, Commercial & Residential Electrician, 2024–2025, Mississippi Commission on Proprietary School and College Registration, License No. C-624; reported for DTC’s Mississippi campuses):

  • Completed within 150% of the normal time for completion: 85%
  • Graduates employed in their field of study or a related field within six months: 77%
  • Students achieving mastery of stated goals of the program of study: 85%

Campus Location

Ridgeland
113 Marketridge Drive
Ridgeland, MS 39157

Why Accreditation Is Important

DTC is accredited by the Accrediting Commission of Career Schools & Colleges (ACCSC). DTC is approved by the U.S. Department of Education to participate in federally-funded financial aid programs.

Delta Technical College is licensed by the Mississippi Commission on Proprietary Schools and College Registration, Certificate No. C-624. Licensure indicates only that minimum standards have been met; it is not an endorsement or guarantee of quality. Delta Technical College is authorized for operation as a postsecondary educational institution by the Tennessee Higher Education Commission.

  • A reliable indicator of quality
  • Approved program of study
  • Qualified instructors
  • Recognition by employers nationwide

Accreditations

Accrediting Commission of Career Schools and Colleges (ACCSC)

Other Programs at Ridgeland

Delta Technical College in Ridgeland, MS also offers these 7 programs at 113 Marketridge Drive, Ridgeland, MS 39157.

Delta Technical College

CDL Training Course

Certificate Of Completion

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
180 clock hours; 16 days (day) or 24 days (evening/Saturday)
App fee
None
Tuition
$4,076 for the Program
Delta Technical College

Cosmetology School

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
13 months; 1,500 clock hours (300 theory / 1,200 practical)
App fee
None
Tuition
$20,490 for the Program
Delta Technical College

Dental Assisting

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
35 weeks; 765 clock hours incl. 225 externship hours; 26.5 semester credits
App fee
None
Tuition
$17,200 for the Program
Delta Technical College

HVAC/R Technician

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
35 weeks (9 months); 735 clock hours; 28 semester credits
App fee
None
Tuition
$16,581 for the Program
Delta Technical College

Medical Assisting

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
35 weeks; 765 clock hours incl. 225 externship hours; 26.5 semester credits
App fee
None
Tuition
$17,173 for the Program
Delta Technical College

Professional Truck Driving

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
750 clock hours; 20 weeks (day) or 24 weeks (evening); 24 semester credits
App fee
None
Tuition
$11,763 for the Program
Delta Technical College

Welding

Diploma

On-CampusFinancial Aid
Ridgeland
Ridgeland, MS
Next start
Rolling enrollment
Duration
30 weeks (7 months); 720 clock hours; 27 semester credits
App fee
None
Tuition
$16,024 for the Program
Ready to get started?
Request information about Industrial, Commercial and Residential Electrician at Ridgeland.
Industrial, Commercial and Residential Electrician