ITEC Training & Education Center

Hydronic System Installation: Near Boiler Piping and Layout

Rochester
Rochester, NY
Certification · On Campus
Hydronic System Installation: Near Boiler Piping and Layout
Course certifications are backed by the American Council for Construction Education (ACCE); no institutional accreditation or state approval is stated.
In person at ITEC's training center, 105 McLaughlin Road, Rochester, NY.
$1,795 course fee per participant.
30 hours over 3.5 or 4 consecutive days in one week.
ITEC publishes no application fee or registration fee for this course.
No federal financial aid is stated. ITEC says some courses are grant-funded for qualifying participants.

Hydronic System Installation: Near Boiler Piping and Layout is a Certification program offered by ITEC Training & Education Center in Rochester, NY. The program takes 30 hours over 3.5 or 4 days to complete, with a total tuition of $1,795.

Program Overview

Unlock the intricacies of hydronic system installation with this specialized course focused on near boiler piping and layout. Designed for HVAC professionals looking to enhance their installation skills, this hands-on training provides in-depth knowledge of the essential components and configurations required for effective hydronic systems.

You will explore the fundamentals of hydronic system design, focusing on proper near boiler piping techniques, including supply and return lines, venting, and boiler connections. The course emphasizes best practices for layout and installation, ensuring efficiency, safety, and compliance with local codes.

By the end of this course, you'll be equipped with the skills and knowledge necessary to confidently install hydronic systems with a strong focus on near boiler piping and layout.

What sets this Program apart

Practical lab sessions. Through practical lab sessions, you will gain hands-on experience in piping installations, component assembly, and system configurations. You'll also learn to troubleshoot common installation challenges and optimize system performance for maximum efficiency.

Industry-leading training facilities. Our 30,000-square-foot facility includes multifunctional tech labs and interactive classroom spaces. Eight separate lab modules allow hands-on skill development, and a full-scale indoor house is built for real-world construction and HVAC training.

Hands-on experience that mirrors the job site. When you train at ITEC, you don't just learn from a textbook. Students work with actual equipment in real scenarios, which is exactly what employers want to see. Our training ensures you can confidently step onto a job site and have the skills to perform from day one.

Recognition and accreditation. We're one of the nation's leading training and certification providers with recognition and accreditation from many industry organizations, including North American Technician Excellence (NATE), American Council for Construction Education (ACCE), National Oilheat Research Alliance (NORA) and The ESCO Institute. A vast network of testing organizations recognizes us as an official training provider.

The ITEC difference. State-of-the-art facility; certified instructors with real-world industry experience; industry recognized certifications; hands-on experience; pathway to employment and career advancement; strong community partnerships; workforce development leader.

Admission Requirements and Process

Who can register. Anyone interested in HVAC or other trades can register. No prior experience is necessary for beginner courses. As expected, advanced programs require some knowledge and experience.

Prerequisite for this course. ITEC Hydronic 1 course completion or test out with ESCO Employment Ready Hydronic, Low Pressure Systems ($15 fee).

Course level. Level Three: All Level Three Classes Have multiple prerequisites or testing out by achieving any professional level certification related to the Class.

Tools. TOOLS ARE REQUIRED FOR ALL TECHNICIANS TAKING THIS COURSE.

Custom training. ITEC is also able to create custom built curricula created with the unique needs of your company and technicians at the top of mind.

General Requirements

  • Register in advance
    All of ITEC's courses require that you register in advance.
  • Course prerequisite
    ITEC Hydronic 1 course completion or test out with ESCO Employment Ready Hydronic, Low Pressure Systems ($15 fee).
  • Experience
    Anyone interested in HVAC or other trades can register. No prior experience is necessary for beginner courses; advanced programs require some knowledge and experience.
  • Tools
    TOOLS ARE REQUIRED FOR ALL TECHNICIANS TAKING THIS COURSE.

Application Process

  1. 1
    Find a session
    Courses available for enrollment are listed on ITEC's registration calendar, with descriptions and possible prerequisite course needs.
  2. 2
    Meet the prerequisite
    ITEC Hydronic 1 course completion or test out with ESCO Employment Ready Hydronic, Low Pressure Systems ($15 fee).
  3. 3
    Register in advance
    All ITEC courses require advance registration. Registration and payment of the course fee are taken on ITEC's online registration calendar.
  4. 4
    Ask about group registration
    Private HVAC businesses or technical schools registering a large group of students are encouraged to call ITEC in advance; the Program Coordinator can reserve seats and assist with a group registration.

Program Schedule

Course format. All courses are 30 hours over 3.5 or 4 consecutive days in one week for concentrated focus, with a 25% class / 75% lab structure for maximum hands-on training.

Daily hours. 9:30 to 5:30 Monday to Wednesday, 9:30 to 1:30 Thursday.

Class size. Limited to 12 participants per class to facilitate engagement.

Advance registration. All of our courses do require that you register in advance. Courses available for enrollment are listed on ITEC's registration calendar, with descriptions and possible prerequisite course needs.

Upcoming sessions. ITEC's registration calendar, read on November 8, 2026, lists no upcoming session of this course.

Campus Location

Rochester
105 McLaughlin Road
Suite B
Rochester, NY 14615

Why Accreditation Is Important

ITEC Training & Education Center describes itself as one of the nation's leading training and certification providers with recognition and accreditation from many industry organizations, including North American Technician Excellence (NATE), American Council for Construction Education (ACCE), National Oilheat Research Alliance (NORA) and The ESCO Institute. Each course offers a certification backed by ACCE.

The school's website does not state an institutional accreditation or a state licence or approval.

Cost of Attendance and Financial Aid Information

Cost and Financial Aid Information is an estimate for general reference only. It is not an offer or guarantee of financial aid or of any price, and what a School charges you may differ.
Total Program Tuition
≈ $1,795

Course fee. Course Fee: $1,795 per participant, as published on ITEC's HVAC course schedule.

Certification exams. NATE Gas Hydronics is $140 (core required) and ESCO Hydronic, Low Pressure Systems is $35 (core required). Testing out with ESCO Employment Ready Hydronic, Low Pressure Systems is a $15 fee. NATE certification testing is available at the end of class at additional cost. When these exams are taken in conjunction with an ITEC class, the proctoring fee is waived; a Proctor Fee of $50 is added to any exam cost for exams not taken with corresponding courses.

Who pays for certification. The cost of these independent certifications can be covered by either the sponsoring company or the individual technician.

Grants and group registration. Some courses are even grant-funded for qualifying participants. If you are a private HVAC business or technical school interested in registering a large group of students, we encourage you to call us in advance: our Program Coordinator will make sure we have all of the available seats for your technicians and can assist with a group registration.

Curriculum

The course covers:

  • Fundamentals of hydronic system design
  • Near boiler piping techniques, including supply and return lines, venting, and boiler connections
  • Best practices for layout and installation, and compliance with local codes
  • Piping installations, component assembly, and system configurations
  • Troubleshooting common installation challenges

Career Outcomes

Certifications. Certifications: ITEC Hydronics 2 (service), NATE Gas Hydronics ($140, core required), ESCO Hydronic, Low Pressure Systems ($35, core required).

Start a career. The team at ITEC is proud to offer hands-on, career-focused training with HVAC, plumbing, and electrical courses to help individuals gain the skills needed to start or advance in the skilled trades. We make it easy to enroll whether you're just beginning your career or looking to grow your expertise.

Career connections and networking. We don't just train you; we help you get hired. Many courses include direct connections to local employers, plus insights into career paths and industry networking.

A workforce development driver. ITEC's training and education curriculum is a workforce development driver for the mechanical trades and helps graduates begin their careers at the end of our programs. Whether you're starting fresh, making a career change, or advancing in your current field, we have a course for you.

What to expect as an ITEC Training & Education Center student

The training center. The 30,000 square foot ITEC Training & Education Center includes a 20,000 square foot multi-functional technical lab as well as 10,000 square feet of fully interactive classroom space. ITEC features 8 separate lab modules as well as a full scale house built indoors to support real world training.

In person, in Rochester. All programs and trainings are in-person, at 105 McLaughlin Road, Suite B, Rochester, NY 14615. ITEC trains future professionals, career changers, and industry veterans looking to sharpen their skills, and its programs cater to all experience levels.

Community training partnership. ITEC partners with local community agencies to train technicians with HVAC and Construction skills expertise. In the last year alone, ITEC has had participants from Access VR, Vertus Academy, Urban League, Center for Youth, Volunteers of America, Veterans Outreach Center, Rochester Educational Opportunity Center, U Prep, Edison Tech, and Livingston County Workforce Development.

By the numbers. ITEC reports 6+ years in business, 30+ community partnerships, 75+ HVAC contractors and 2000+ course participants.

Traveling to a course. The closest accommodation to our facility is the Hampton Inn by Hilton Rochester-Greece (500 Center Place Drive, Rochester, NY 14615). The hotel offers students a corporate rate when attending courses at ITEC; just provide our corporate ID when booking a room to get your discount: 0003327714. The rooms can be reserved as a single or double and they provide breakfast every morning.

Testimonials

“Very impressive what they have built to help train young people interested in a great career path.”

Michael S.

Other Programs at Rochester

ITEC Training & Education Center in Rochester, NY also offers these 25 programs at 105 McLaughlin Road, Suite B, Rochester, NY 14615.

Ready to get started?
Request information about Hydronic System Installation: Near Boiler Piping and Layout at Rochester.
Hydronic System Installation: Near Boiler Piping and Layout